Does anyone have seen this error on a RB600??.
I have a ptp link testing in the lab with this configuration:

Unit A

0 name="wlan1" mtu=1500 mac-address=xx:xx:xx:xx:xx:xx arp=enabled interface-type=Atheros AR5213 mode=ap-bridge
ssid="xx" frequency=5825 band=5ghz scan-list=default antenna-mode=ant-a wds-mode=disabled
wds-default-bridge=bridge1 wds-ignore-ssid=no default-authentication=yes default-forwarding=yes
default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default compression=no


Unit B
0 name="wlan1" mtu=1500 mac-address=xx:xx:xx:xx:xx:xx arp=enabled interface-type=Atheros AR5213 mode=station-wds
ssid="xx" frequency=5825 band=5ghz scan-list=default antenna-mode=ant-a wds-mode=dynamic
wds-default-bridge=bridge1 wds-ignore-ssid=no default-authentication=yes default-forwarding=yes
default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default compression=no

Both units with nstreme and polling enabled, test with dinamic size, and best-fit 4000, same result with both options. The minipci cards are SR5 the cpu is running at 400mhz (tested on 533mhz too). I have posted the supout.rif to support@mikrotik.com.
The power units are 48v 2 amps, router OS v3.2
The unit that reboots is the Unit B, a this happens when the troughput is the maximun, tested in turbo mode and normal mode (20mhz channel)

Any suggestion to this problem?

regards

Just downgraded to v3.0 and now have 2 hours uptime kicking 36mbps without problems and no reboots, same config and same hardware. Now I´m going to test in turbo mode.
Maybe the problem is a bug in v3.2.

I Have this problem with ROS V3.3, this bug be solved in future releases?

try 3.4 and then send the autosupout.rif to support please!
let's make one topic out of this:
http://forum.mikrotik.com/viewtopic.php?f=3&t=22265