```[admin@MikroTik] > ip/smb/print
enabled: yes
status: enabled
domain: home
comment: MikrotikSMB
interfaces: all
[admin@MikroTik] > ip/smb/shares/print
Flags: X - DISABLED; * - DEFAULT
Columns: NAME, DIRECTORY, REQUIRE-ENCRYPTION, VALID-USERS
# NAME DIRECTORY REQUIRE-ENCRYPTION VALID-USERS
;;; default share
0 X* pub /flash/pub no
1 share sd1 no user
smb
guest
[admin@MikroTik] > ip/smb/users//print
expected command name (line 1 column 14)
[admin@MikroTik] > ip/smb/users/print
Flags: r - READ-ONLY
Columns: NAME, PASSWORD
# NAME PASSWORD
0 smb ....
1 user ....
2 r guest
[admin@MikroTik] >
system/resource/print
uptime: 19m27s
version: 7.14.2 (stable)
build-time: 2024-03-27 07:48:52
factory-software: 6.36.1
free-memory: 182.9MiB
total-memory: 256.0MiB
cpu: MIPS 1004Kc V2.15
cpu-count: 4
cpu-frequency: 880MHz
cpu-load: 3%
free-hdd-space: 4288.0KiB
total-hdd-space: 16.0MiB
write-sect-since-reboot: 206
write-sect-total: 1797657
architecture-name: mmips
board-name: hEX
platform: MikroTik
```
From linux:
```smbclient //172.16.0.1/share -U user%pass
Bad SMB2 (sign_algo_id=1) signature for message
[0000] 40 E0 96 A2 83 CD 64 F9 CB 90 D4 B0 00 C7 C3 02 @.....d. ........
[0000] 4D 73 4B E1 49 21 40 F3 0E 7A B6 B8 AF 1D 89 B4 MsK.I!@. .z......
session setup failed: NT_STATUS_ACCESS_DENIED```
From Windows:
You dont have enough permission.
```nxc smb 172.16.0.1 -u 'user' -p 'pass' --shares
SMB 172.16.0.1 445 MikroTik [*] (name:MikroTik) (domain:MikroTik) (signing:False) (SMBv1:False)
SMB 172.16.0.1 445 MikroTik [+] MikroTik\user:user1234
SMB 172.16.0.1 445 MikroTik [*] Enumerated shares
SMB 172.16.0.1 445 MikroTik Share Permissions Remark
SMB 172.16.0.1 445 MikroTik ----- ----------- ------
SMB 172.16.0.1 445 MikroTik share READ,WRITE```