Community discussions

MikroTik App
 
Black1981
just joined
Topic Author
Posts: 5
Joined: Wed May 27, 2020 2:38 pm

MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Wed May 27, 2020 2:51 pm

Good afternoon! Are you interested in the code to appear support for LTE modems Intel XMM 7560 Cat 16 and Quectel EM12-G Cat 12 for MIKROTIK RBM33G? And will she appear at all? They have an m.2 socket but they can be used in conjunction with a M.2 to mini pcie adapter. It's just that Cat 6 modems are a bit outdated.
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1888
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Wed May 27, 2020 8:52 pm

About what code you say/write and why the Quectel EM12-G will not work in ecm mode ?
 
Black1981
just joined
Topic Author
Posts: 5
Joined: Wed May 27, 2020 2:38 pm

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Wed May 27, 2020 11:36 pm

I meant the drivers of these devices in RouterOS. In fact, I found on Wikipedia a list of supported 4G modems, but there was nothing fresh there. These modems stick to the RouterOS ? There is a new list of supported lte modems?
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1888
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Thu May 28, 2020 10:36 am

List is updated and we at community not know any more what we write at forum.
I help person with LM12-g, Tetil lm940..
 
Black1981
just joined
Topic Author
Posts: 5
Joined: Wed May 27, 2020 2:38 pm

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Thu May 28, 2020 12:27 pm

It turned out to launch Quectel EM12-G? Will the Intel XMM 7560 Cat 16 work?
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1888
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Thu May 28, 2020 2:56 pm

It turned out to launch Quectel EM12-G?
yes, one person use m2<>mPCIe adapter with that module and it works similar to EP06
MikroTik Chateau use that SoC too, EG12 but not in Global version.
Will the Intel XMM 7560 Cat 16 work?
I don't know bcs this is a not module but SoC who is used in many modules like Fobocom - I personal not like that vendor bcs I not have any answers from their support.
 
Black1981
just joined
Topic Author
Posts: 5
Joined: Wed May 27, 2020 2:38 pm

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Fri May 29, 2020 2:19 pm

Thank you very much, I will try!
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1888
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Fri May 29, 2020 3:20 pm

Maybe better is wait... I don;t know how long but I sure that new LTE device from MikroTik will be
* at M.2, Chateau is ready and probably his EG12 is a module at m.2 ? We not have sure until someone not check it.
* all ppl wait for better LHGR XL + 1Gb port + LTE as m.2 slot for cat.>=12

and I have very big hopes at that new line of devices...
 
RogerWilco
Member
Member
Posts: 434
Joined: Wed Feb 16, 2011 6:02 am
Location: Australia

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Sat May 30, 2020 2:25 am

Maybe better is wait... I don;t know how long but I sure that new LTE device from MikroTik will be
* at M.2, Chateau is ready and probably his EG12 is a module at m.2 ? We not have sure until someone not check it.
* all ppl wait for better LHGR XL + 1Gb port + LTE as m.2 slot for cat.>=12

and I have very big hopes at that new line of devices...
My hope if just for another SXT variant with an antenna purely designed for low bands, the same with a LHG (preferably with PoE out).
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1888
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Mon Jun 01, 2020 3:54 pm

Maybe better is wait... I don;t know how long but I sure that new LTE device from MikroTik will be
* at M.2, Chateau is ready and probably his EG12 is a module at m.2 ? We not have sure until someone not check it.
* all ppl wait for better LHGR XL + 1Gb port + LTE as m.2 slot for cat.>=12

and I have very big hopes at that new line of devices...
My hope if just for another SXT variant with an antenna purely designed for low bands, the same with a LHG (preferably with PoE out).
Currently we can wait... or build some similar to this one https://www.lteforum.at/mobilfunk/proje ... ost-262440
 
Black1981
just joined
Topic Author
Posts: 5
Joined: Wed May 27, 2020 2:38 pm

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Mon Jun 08, 2020 6:12 pm

According to this review, MikroTik Chateau does not have an M.2 connector, and the EG12 chip is soldered to the motherboard. https://mikrotikon.pl/mikrotik-chateau- ... uteros-v7/
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1888
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Mon Jun 08, 2020 8:48 pm

According to this review, MikroTik Chateau does not have an M.2 connector, and the EG12 chip is soldered to the motherboard. https://mikrotikon.pl/mikrotik-chateau- ... uteros-v7/
exacly, that PCB have got prepared M.2 socket and we can just wait for new era of devices with M.2 & (EG16/18 and/or RG500Q) SoC modules. We must wait.
 
hecatae
Member Candidate
Member Candidate
Posts: 247
Joined: Thu May 21, 2020 2:34 pm

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Tue Feb 01, 2022 1:58 am

I have the fibocom l860 gl, cat16 m2 card.
Going to test in my ltap mini
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1888
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Fri Feb 04, 2022 10:06 pm

hecatae write:
I have the fibocom l860 gl, cat16 m2 card.
Going to test in my ltap mini
We not run the fibicom without a AT Command book, the seller not prodive it, the Fibicom support not answer to us and we stop at 1 unit of this device.
If you want use it then proper docementation and support is a first step..
 
hecatae
Member Candidate
Member Candidate
Posts: 247
Joined: Thu May 21, 2020 2:34 pm

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Sun Feb 06, 2022 1:52 pm

hecatae write:
I have the fibocom l860 gl, cat16 m2 card.
Going to test in my ltap mini
We not run the fibicom without a AT Command book, the seller not prodive it, the Fibicom support not answer to us and we stop at 1 unit of this device.
If you want use it then proper docementation and support is a first step..
AT command book is here https://www.docdroid.net/gEsTYmk/fiboco ... l-v323-pdf

Reading at present
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1888
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Sun Feb 06, 2022 9:00 pm

I write in general... I have this and few others documentation but what we need is to know how to
*) change a mode between ECP/MBIM/ADB on module
*) Disable USB3.0 bus, for use USB 2.0
*) do a Cell Lock if it's supported
*) get all signals data if RouuterOS not show them
*) setup manualy APN if RouterOS cannot do that properly
*) set a own IMEI on module if possible

Those are topic's who must be answered in our projects and official support, distributor not prodive answers and we migrate to Quectel modules.
 
User avatar
floaty
Member
Member
Posts: 357
Joined: Sat Oct 20, 2018 1:24 am
Location: 52°08'32.34"N 14°39'05.0"E

Re: MIKROTIK RBM33G and modem LTE Cat 12 и Cat 16

Fri Jul 12, 2024 9:32 pm

is accessible in USB-mode in v6.49.x ( used 6.49.15 ) ... but not in v7.x.x ( seems ACM usb-serial-support is removed in v7 [?] )
.
modem show's no signs of life as a PCIE-device in router-os ... there are lots of undocumented AT-commands avail. ( to force pcie-mode [?] ) ... but ... no coop from fibocom ... so far ¯\_(ツ)_/¯
.
ppp-interface is not working because of a PIN-problem ... surmise: un-matching mini-pcie--m.2--adapter in use
.
[admin@rbm33g] > system resource usb print detail 
 0 device="1-0" vendor="Linux 3.3.5 xhci-hcd" name="xHCI Host Controller" serial-number="ralink-xhci" vendor-id="0x1d6b" device-id="0x0002" speed="480" ports=2 usb-version=" 2.00" 

 1 device="2-0" vendor="Linux 3.3.5 xhci-hcd" name="xHCI Host Controller" serial-number="ralink-xhci" vendor-id="0x1d6b" device-id="0x0003" speed="5000" ports=1 usb-version=" 3.00" 

 2 device="1-2" vendor="Intel Corp." name="MODEM + 2 CDC-ACM + 3 CDC-NCM + SS" serial-number="****" vendor-id="0x8087" device-id="0x095a" 
   speed="480" usb-version=" 2.10" 
[admin@rbm33g] 
.
[admin@rbm33g] > port print detail 
Flags: I - inactive 
 0   name="serial0" used-by="Serial Console" device="" channels=1 baud-rate=auto data-bits=8 parity=none stop-bits=1 flow-control=none 

 1   name="serial1" used-by="" device="" channels=1 baud-rate=auto data-bits=8 parity=none stop-bits=1 flow-control=none 

 2   name="usb3" used-by="PPP <ppp-out1>" device="" channels=3 baud-rate=auto data-bits=8 parity=none stop-bits=1 flow-control=none 
[admin@rbm33g] > 
.
[code][admin@rbm33g] > interface ppp-client info 
number: ppp-out1
       modem-status: unavailable
         pin-status: ERROR
      functionality: full
       manufacturer: Fibocom 
              model: L860-GL-16 LTE Module 
           revision: 18601.5001.01.01.16.51 
      serial-number: +GSN: "*******************"
   current-operator: ERROR (unknown)
               imsi: n/a
  access-technology: ERROR
    signal-strength: ERROR: parsing failed
   frame-error-rate: n/a

[admin@rbm33g] > 
>
.

Who is online

Users browsing this forum: No registered users and 4 guests