I have set up a firewall rule and a dst-nat rule from port 8899 to port 8291 but like mentioned the port is not open.
I have also configured the modem to port forward 8899 => 8899 to 192.168.1.152 (MT's local address)
Can someone please offer advice ?
P.S. ISP modem is on Dynamic address
Code: Select all
/ip firewall filter
add action=accept chain=input dst-port=8899 in-interface=ether1 protocol=tcp
add action=accept chain=input dst-port=500,1701,4500 in-interface=ether1 \
protocol=udp src-address=0.0.0.0/0
add action=accept chain=input in-interface=ether1 protocol=ipsec-esp
add action=accept chain=input comment="accept established,related,untracked" \
connection-state=established,related,untracked
add action=drop chain=input comment="drop invalid" connection-state=invalid
add action=accept chain=input comment="accept ICMP" protocol=icmp
add action=accept chain=forward comment=\
"accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="drop invalid" connection-state=invalid
add action=accept chain=forward comment="accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="accept out ipsec policy" \
ipsec-policy=out,ipsec
/ip firewall nat
add action=masquerade chain=srcnat
add action=dst-nat chain=dstnat dst-port=8899 in-interface=ether1 protocol=\
tcp to-addresses=192.168.1.152 to-ports=8291
