hi team is this normal??
device is a hapax3 latest 7.16rc1
im in the interface list and i wonted to see the lan ports tx/rx as this is where i have my caps connected
port 1 is wan
port 2,3,4 have caps connected
port 5 is my lan to my switch
i can see the wan and port 5 tx/rx but the other 3 have working?? they work as the caps are getting connections from the wifi devices i just cant see any traffic?? on the wifi section of the caps under the bridge section??
is this normal or do i have something not configured or have i missed anything i should be looking for?
or am i not meant to see that from the router???

if you use "local forwarding" in your datapaths, try unchecking it

if you use "local forwarding" in your datapaths, try unchecking it

thanks but i cant see any local forwarding in data paths?? there is no option for it??
where and what should i de looking for?
all these devices are caps managed by capsman

if I'm not mistaken you can find it in the capsman datapaths

It is normal for Wifi CAPsMAN to not see traffic on the Wifi CAPsMAN device. "manager forwarding" has been removed. Only "local forwarding" exists and CAP traffic does not pass the Wifi CAPsMAN.

I found it irritating too first time I set up Wifi CAPsMAN. And Mikrotik should IMHO add comments to these interface with a hint. It looks like an error when bytes counter stays zero.