I would like to start a project buliding a Windows client taskbar program that would be able to communicate with the btest server in MT.
Does MT have that code/protocol somewhere?
Anyone want to work on this with me?
I'm planning on using the .NET platform in Windows to start with.
True. I've written a program to test bandwidth before.
I would rather make have their code or a library as reference for the sake of compatibility.
But if necessary we could reverse engineer it.
Here is what I would like to see this used for:
Have a client service which could on demand do a quick send/receive speed check to a MT box on the network. Maybe also do a very brief test every hour or few hours on pseudo random interval and keep a local databse of the results. Or interface with a web service to have a central server keep track.
The service on Windows would be represented on the front end by a task bar icon allowing the user to do a quick check of speed themselves within the network.
I would rather make have their code or a library as reference for the sake of compatibility.
But if necessary we could reverse engineer it.
Here is what I would like to see this used for:
Have a client service which could on demand do a quick send/receive speed check to a MT box on the network. Maybe also do a very brief test every hour or few hours on pseudo random interval and keep a local databse of the results. Or interface with a web service to have a central server keep track.
The service on Windows would be represented on the front end by a task bar icon allowing the user to do a quick check of speed themselves within the network.
I'm after the same uses as you :)
We have a partner who makes LocationFree TV that is streaming across the internet to a clients tv monitor - they want to check the bandwidth available for upstream before a customer signs up. I'd love to use MT as and endpoint for tests to be run against.
Anyhow, I think the only way is to reverse engineer the protocol / handshake.
Sam
We have a partner who makes LocationFree TV that is streaming across the internet to a clients tv monitor - they want to check the bandwidth available for upstream before a customer signs up. I'd love to use MT as and endpoint for tests to be run against.
Anyhow, I think the only way is to reverse engineer the protocol / handshake.
Sam
Below is the initial handshake a windows client sending btest authentication to MT. . . looks like its using some two way encryption on the password. the user is #admin# and the password was PASSWORD. It's not likely to do authenticated sessions, but maybe something without authentication might still work. MT would be appreciated even that much more if they would send the protocol spec for us. Although, being closed source does keep security tighter ( I think ) so i understand if they don't want to.
Sam
Sam
Code: Select all
00000000 01 00 00 00 ....
00000000 01 02 00 00 ....
00000004 dc 05 00 00 40 4b 4c 00 00 00 00 00 ....@KL. ....
00000004 02 00 00 00 09 8d 25 44 6e c8 0b 8a 45 2f d8 c0 ......%D n...E/..
00000014 14 90 79 62 ..yb
00000010 77 da 2c d5 6f a0 83 63 07 7b cf 55 71 43 cd 97 w.,.o..c .{.UqC..
00000020 23 61 64 6d 69 6e 23 00 00 00 00 00 00 00 00 00 #admin#. ........
00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
00000018 00 00 00 00 ....
Hmm... I guess we could make a go without the encryption and set the end MT to no password or no user authentication. It really would help if they would release a library at the least. That way they can keep their stuff to themselves, but allow us to use the mechanism.
Have you done a trace to figure out the handshake between the client and server during a test, after the authentication is complete?
Have you done a trace to figure out the handshake between the client and server during a test, after the authentication is complete?
Its a little hard to determine easily, but I did find pieces of the handshake. It looks like there is always a TCP connection for control., even if using UDP transport for data traffic. There are 12 byte data fields that tell the server what to do - possibly more. The client requests a test and the server seems to just spit it back with garbage data that you can time. Hopefully you don't accidentally send it a request to packet you for hours : )
First 2 bytes tell the server size the expected packet size.
Second 2 bytes are unknown at this time.
Next 4 bytes tell the server what speed.
Last 4 bytes unknown at this time.
I don't think it'll be terribly hard to create something without authentication ability, but yes, it would be nice so it's not abused. I'll look into it more this evening.
Sam
First 2 bytes tell the server size the expected packet size.
Second 2 bytes are unknown at this time.
Next 4 bytes tell the server what speed.
Last 4 bytes unknown at this time.
I don't think it'll be terribly hard to create something without authentication ability, but yes, it would be nice so it's not abused. I'll look into it more this evening.
Sam
.NET, C++, doesn't matter much to me.
This is the response I got from John:
I guess the minqwm10.dll that comes with the .exe is just generic shim?
This is the response I got from John:
So, I guess that leaves us with hacking it out or waiting for them to provide something.We don't have enough resources at the time to support this. We will consider this in the future.
John
I guess the minqwm10.dll that comes with the .exe is just generic shim?
Who is online
Users browsing this forum: Mosmos and 19 guests