Does anyone know how to telnet from a Mikrotik to another device via telnet when said devices telnet port is on a non-standard port.
For example:
I want to to telnet to a Trango or Canopy that is on telnet port x, but there is no place to input x when using telnet in Mikrotik. From what I have found, you only telnet to a device if the telnet port is 23. So canopy is no problem if you have the telnet port on 23, mikrotik is no problem is you have telnet port on 23, but that means you are bound to keeping your telnet ports on 23 if you want to telnet from a Mikrotik.
Any ideas?
Re: How to telnet with non-standard port
For example "/system telnet someone.com 25" for asking on 25 TCP port
Does anyone know how to telnet from a Mikrotik to another device via telnet when said devices telnet port is on a non-standard port.
For example:
I want to to telnet to a Trango or Canopy that is on telnet port x, but there is no place to input x when using telnet in Mikrotik. From what I have found, you only telnet to a device if the telnet port is 23. So canopy is no problem if you have the telnet port on 23, mikrotik is no problem is you have telnet port on 23, but that means you are bound to keeping your telnet ports on 23 if you want to telnet from a Mikrotik.
Any ideas?
Re: How to telnet with non-standard port
That worked. Thanks!
-
-
Ibersystems
Forum Guru
- Posts: 1686
- Joined:
- Location: Cabrils, Barcelona - Spain
- Contact:
Re: How to telnet with non-standard port
I have problems with this...
Look:
Don't work in 3.13 ¿?
In my windows console it works.
Look:
Code: Select all
[admin@HOTSPOT-VPN] > ping 192.168.1.22
192.168.1.22 64 byte ping: ttl=128 time=1 ms
192.168.1.22 64 byte ping: ttl=128 time<1 ms
192.168.1.22 64 byte ping: ttl=128 time<1 ms
192.168.1.22 64 byte ping: ttl=128 time<1 ms
192.168.1.22 64 byte ping: ttl=128 time<1 ms
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0/0.2/1 ms
[admin@HOTSPOT-VPN] > system telnet 192.168.1.22 21
[admin@HOTSPOT-VPN] > system telnet 192.168.1.22 80
In my windows console it works.
Re: How to telnet with non-standard port
just checked in 3.24:
Code: Select all
[admin@MikroTik] > sy telnet 192.168.0.1 80
Trying 192.168.0.1...
Connected to 192.168.0.1.
Escape character is '^]'.
GET / HTTP/1.0
HTTP/1.1 302 Found
...
-
-
Ibersystems
Forum Guru
- Posts: 1686
- Joined:
- Location: Cabrils, Barcelona - Spain
- Contact:
Re: How to telnet with non-standard port
It works in 3.24, not in 3.13 ; )
[admin@HOTSPOT-VPN] > system telnet 192.168.1.56 10000
Trying 192.168.1.56...
Connected to 192.168.1.56.
Escape character is '^]'.
Thanks,
[admin@HOTSPOT-VPN] > system telnet 192.168.1.56 10000
Trying 192.168.1.56...
Connected to 192.168.1.56.
Escape character is '^]'.
Thanks,
Re: How to telnet with non-standard port
ummm ... upgrade?
-
-
Ibersystems
Forum Guru
- Posts: 1686
- Joined:
- Location: Cabrils, Barcelona - Spain
- Contact:
Re: How to telnet with non-standard port
I did! xD