Community discussions

MikroTik App
 
MiruK
just joined
Topic Author
Posts: 12
Joined: Fri Dec 09, 2005 12:50 pm

MT3.3-3.7 PCQ bug

Sat Apr 12, 2008 9:23 pm

MT3.3-3.7 ,when I use queue type:pcq ,after a time queue blocks all traffic,

on mt 3.2 works OK, what is going on ?
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8712
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: MT3.3-3.7 PCQ bug

Mon Apr 14, 2008 1:46 am

we use pcq in 3.7 (uptime now is 6 days), we used it in 3.5 (with 15 days uptime) - no troubles =)

maybe post your config here?
 
imachine
just joined
Posts: 3
Joined: Sun Mar 30, 2008 2:32 am

Re: MT3.3-3.7 PCQ bug

Thu Apr 17, 2008 3:42 pm

I too would like some update on this.

Can anyone confirm working pcq queues above 3.2 ?

I'd like to use it on 3.7 and 3.6, but on 3.7@RB150 it too fails after a while. It could just as well be a config error, as I have then tried if I recall correctly with parent queues as PCQ, but I hear others too had issues with pcq in general above 3.2, so I have not tried changing the parent to something else and staying with pcq as child queues @ 3.7.

Please drop a line about working pcq in RouterOS > 3.2
 
dsovereen
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Fri Oct 22, 2004 7:54 pm
Location: Michigan, USA
Contact:

Re: MT3.3-3.7 PCQ bug

Sat Apr 19, 2008 5:10 pm

We're using PCQ in 3.7 without any problems.

Dave
 
imachine
just joined
Posts: 3
Joined: Sun Mar 30, 2008 2:32 am

Re: MT3.3-3.7 PCQ bug

Sat Apr 19, 2008 7:09 pm

could you be kind enough to paste your queue config then? what uptimes, what network load? what boards?

cheers!
 
dsovereen
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Fri Oct 22, 2004 7:54 pm
Location: Michigan, USA
Contact:

Re: MT3.3-3.7 PCQ bug

Tue Apr 22, 2008 9:14 am

System uptime is 4 days, 14 hours. Would be higher, except that an electrician accidentially shut off the power circuit feeding the rack this unit is in.

This system is our least busy and the only one running 3.7. All others are 2.9.51. We roll stuff out to this system first before rolling something out to the busier systems. This system handles about 200 clients and pushes up to about 10 megs/sec at peak periods.

Dave

/queue type
set default kind=pfifo name="default" pfifo-limit=50
set ethernet-default kind=pfifo name="ethernet-default" pfifo-limit=50
set wireless-default kind=sfq name="wireless-default" sfq-allot=1514 sfq-perturb=5
set synchronous-default kind=red name="synchronous-default" red-avg-packet=1000 red-burst=20 red-limit=60 red-max-threshold=50 red-min-threshold=10
set hotspot-default kind=sfq name="hotspot-default" sfq-allot=1514 sfq-perturb=5
add kind=pcq name="128k-download" pcq-classifier=dst-address pcq-limit=50 pcq-rate=128000 pcq-total-limit=2000
add kind=pcq name="128k-upload" pcq-classifier=src-address pcq-limit=50 pcq-rate=128000 pcq-total-limit=2000
add kind=pcq name="bronze-download" pcq-classifier=dst-address pcq-limit=50 pcq-rate=580000 pcq-total-limit=2000
add kind=pcq name="bronze-upload" pcq-classifier=src-address pcq-limit=50 pcq-rate=140000 pcq-total-limit=2000
add kind=pcq name="silver-upload" pcq-classifier=src-address pcq-limit=50 pcq-rate=280000 pcq-total-limit=2000
add kind=pcq name="gold-upload" pcq-classifier=src-address pcq-limit=50 pcq-rate=580000 pcq-total-limit=2000
add kind=pcq name="silver-download" pcq-classifier=dst-address pcq-limit=50 pcq-rate=1080000 pcq-total-limit=2000
add kind=pcq name="gold-download" pcq-classifier=dst-address pcq-limit=50 pcq-rate=2080000 pcq-total-limit=2000
set default-small kind=pfifo name="default-small" pfifo-limit=10
/queue interface
set ether1 queue=ethernet-default
set ether2 queue=ethernet-default
set ether1.2 queue=default
set ap queue=default
set pptp-in1 queue=default
set pptp-in2 queue=default
set pptp-in4 queue=default
set pptp-in5 queue=default
set pptp-in6 queue=default
set ether1.1 queue=default
/queue tree
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=1000000 max-limit=1000000 name="128k-upload" packet-mark=128k-upload parent=global-out \
priority=8 queue=128k-upload
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=1000000 max-limit=1000000 name="128k-download" packet-mark=128k-download \
parent=global-out priority=8 queue=128k-download
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=0 name="bronze-download" packet-mark=bronze-download parent=global-out \
priority=7 queue=bronze-download
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=0 name="silver-download" packet-mark=silver-download parent=global-out \
priority=7 queue=silver-download
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=0 name="gold-download" packet-mark=gold-download parent=global-out \
priority=7 queue=gold-download
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=0 name="burst" packet-mark=burst parent=global-out priority=2 queue=default
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=0 name="bronze-upload" packet-mark=bronze-upload parent=global-out \
priority=7 queue=bronze-upload
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=0 name="gold-upload" packet-mark=gold-upload parent=global-out priority=7 \
queue=gold-upload
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=0 name="silver-upload" packet-mark=silver-upload parent=global-out \
priority=7 queue=silver-upload

Who is online

Users browsing this forum: No registered users and 118 guests