I'm writting to ask, if somebody had the same problem that I will describe:
Well, at the moment, I have a wireless point to point, configurated in bridge mode in ROS 2.9.46, where I transport the Internet to another place where I have two MKT PPPoE Server in ROS 3.11, where I have PPPoE, QOS and WebProxy. The problem appears when I try to optimize the networks, with this change:
The equipment of the PTP does not have exigencies in the processor, so I decided to make in there the QOS. To do its, I have to change my version of ROS to the 3.13. Well, it upgrade excellent, and make the PTP and the QOS without problems.
The problems appears in the PPPoE Servers, I can do everything (ping, DNS,etc), except visit page. So I look that the problems is the proxy. When I disable the NAT roule, that redirect the port 80 to the port of the proxy, I can visit pages, so the problems is the web-proxy!!
I tried taking out the QOS, and nothing. The only way that permit me use the PROXY is the downgrade the version of the PTP equipment. THE ONLY WAY WHERE I CAN HAVE PROXY, IS WHEN I WORKS IN THE PTP WITH VERSION 2.9.X!!!
IS SO STRANGE, ISN'T IT?
The roule that I have to disable is this:
Code: Select all
print
Flags: X - disabled, I - invalid, D - dynamic
0 X ;;; redirect CLIENTES_ACTIVOS port 80 to proxy ports
chain=dstnat action=redirect to-ports=8080
src-address-list=clientes_activos dst-port=80 protocol=tcp
Note: CLIENTES_ACTIVOS is a address-list where are the clients connected to the PPPoE Server.
How to different things can interfere each other??y
Thanks
Rafael Lore
