Community discussions

MikroTik App
 
datalinux
just joined
Topic Author
Posts: 10
Joined: Fri Jul 08, 2005 10:15 pm

MB intel DG43NB

Thu Nov 27, 2008 10:35 pm

Hi normis,
I have the MB intel DG43NB, is possible you to make the mikrotik work with this MB ?

the site for this MB Intel is :

http://www.intel.com/products/desktop/m ... erview.htm


thanks.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26968
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Re: MB intel DG43NB

Fri Nov 28, 2008 9:53 am

Is it not working already? What happens if you try to install RouterOS on it?
 
datalinux
just joined
Topic Author
Posts: 10
Joined: Fri Jul 08, 2005 10:15 pm

Re: MB intel DG43NB

Fri Nov 28, 2008 2:56 pm

I used the version Intel/AMD PC 3.16; I created an ISO, I gave boot with the COMPACT DISC and started the installation and mikrotik cannot locate the HD and not the CDROM.
All connected in ide mode.
FATAL ERROR: no harddrives found
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26968
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Re: MB intel DG43NB

Fri Nov 28, 2008 3:22 pm

try to change some bios settings, i don't see a reason why this motherboard couldn't work
 
astuke
newbie
Posts: 41
Joined: Mon Jun 30, 2008 11:02 pm

Re: MB intel DG43NB

Fri Apr 10, 2009 7:45 am

This board works fine on version 3.13, but I had to install the routeros on another machine first.

can't get 3.22 to work.
 
csickles
Forum Guru
Forum Guru
Posts: 1255
Joined: Fri May 28, 2004 8:46 pm
Location: Phoenix, AZ
Contact:

Re: MB intel DG43NB

Fri Apr 10, 2009 5:05 pm

I have seen issues with some SATA CD/DVD drives...

The install chokes when it changes in to the istall mode and tries to exec the installation files..

Boot is ok, but cant run inst code...

A HP ML310 will run RouterOS, but I had to boot from USB, (Netinstalled on another PC / Windows)
I turned off the SATA RAID. It will run from a HD, but the drive must be moved from another system...

USF floppy to netinstall = fail on loading drivers (I think fro the drive, but could be for the NIC)..
Once the system was installed on a drive (elsewhare) or the system was running from USB (using netinstall and installation completed on the ML310) then the system runs like a champ... It sees the SATA drives and all...

So in short.. try USB (using netinstall on windows to prep the usb thumb drive) or install ROuterOS on another machine then move the drive to the target machine..

Remember, that the NICs will all be "unknown".. so the best is to install it, move it to the target and do a /system reset and then configure it from freah on the new system...