Community discussions

MikroTik App
 
sergioszy
just joined
Topic Author
Posts: 11
Joined: Mon Oct 04, 2004 1:36 am
Location: Argentina

Urgent NEW P2P ARES don't mangle

Wed May 11, 2005 12:21 am

I have clients with ARES P2P and for this clients the router don't mark
theirs connections like others P2P, think that others P2P have a low
priority, and this is pain.


Greetings.

I have routerOS 2.8.13. but I not find anything about this in the newer
release 2.8.26.
 
User avatar
Hugh Hartman
Frequent Visitor
Frequent Visitor
Posts: 92
Joined: Fri May 28, 2004 2:01 pm
Location: Fort Kent, Maine

Sun May 15, 2005 7:35 pm

I was hoping that the most recent RouetrOS release would have Ares added in theP2P protocols, (my biggest reason to upgrade a perfect running system is to obtain new P2P protocols),so I upgraded to V2.8.27=no luck

anyways, I have just started to look at ARES and find the default incoming request port is different with each download 28582,48227- so far

so this will have to be approached at the application layer.

I will keep investigating to see if there is a way to limit/block this program
 
User avatar
maximan
Trainer
Trainer
Posts: 543
Joined: Sat May 29, 2004 12:10 am
Location: Rio Cuarto, Argentina
Contact:

Mon May 16, 2005 5:08 pm

Does Ares use warez protocol??? because this protocol was added at 2.8.18.

Maxi.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26918
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Mon May 16, 2005 5:11 pm

yes, test this 'ares' with 'Warez'. also if you find something new, just let us know. we do not keep track of all new p2p programs, there are just too many
 
GJS
Member
Member
Posts: 418
Joined: Sat May 29, 2004 4:07 pm
Location: London

Mon May 16, 2005 7:30 pm

Be aware that only searching on Warez triggers the P2P mangling. File tranfers are not caught so Warez can only be blocked, not throttled.
 
Eastel
just joined
Posts: 3
Joined: Fri Feb 11, 2005 6:49 pm

Thu Jun 09, 2005 3:37 am

proved ver. 2.8.24, 26 and 27, not this the protocol warez....
 
GJS
Member
Member
Posts: 418
Joined: Sat May 29, 2004 4:07 pm
Location: London

Thu Jun 09, 2005 10:12 am

Write to support@mikrotik.com with as much information as possible. They may be able to include it in a future release.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3446
Joined: Mon May 31, 2004 2:55 pm

Thu Jun 09, 2005 11:14 am

Ares uses the same Warez P2P protocol. And you can only drop the warez p2p protocol, it is impossible to limit the speed of this protocol. So if you want to limit the usage of the warez p2p then the only way is to drop it.
I think it was already written in the manual, but i will check and we will update the manual, if it isn't there.
 
OrCAD
Member Candidate
Member Candidate
Posts: 133
Joined: Wed Apr 20, 2005 12:37 pm

Wed Jun 22, 2005 12:32 pm

Hi,
I want to perm-drop gnutella (shareaza) P2P protocol
this rule's are sufficient?

chain=forward in-interface=ether2 out-interface=ether2 protocol=tcp tcp-flags=syn,ack p2p=gnutella connection-state=new action=drop

chain=forward in-interface=ether2 out-interface=ether2 protocol=tcp tcp-flags=syn,ack p2p=gnutella connection-state=established action=drop

Regard's

Who is online

Users browsing this forum: Sebastek, ulds and 74 guests