Hi, it is possible to make function /queue simple move in API?
Please give me syntax.

Thanx

Code: Select all

/queue/simple/move
=.id=queue1

But, I need two variables. Queue whitch I need to move and Queue where I want to move ahad.

in console is :
/queue/simple/move "queue to move" "destination queue"

Thanx

any positive result?

move queue with id=*7E before queue with id=*1

Code: Select all

/queue/simple/move
=.id=*7E
=.id=*1

move queue with id=*7E before queue with id=*1

does not work, the queue is moved to the end

all queues before run php

*19 - queue1
*1A - queue2
*1B - queue3
*1C - queue4
*1D - queue5
*1E - queue6
*1F - queue7
*20 - queue8



run php:

<?php
require('classeAPI.php');

$API = new routeros_api();

$API->debug = true;

if ($API->connect(XXXXXXXX, 'XXXXX', 'xxxxxx'))
{

$API->write('/queue/simple/move',false);
$API->write('=.id=*1D',false);
$API->write('=.id=*1B');

$ARRAY = $API->read();

$API->disconnect();
}
?>



after run php:

*19 - queue1
*1A - queue2
*1C - queue4
*1D - queue5
*1E - queue6
*1F - queue7
*20 - queue8
*1B - queue3

as you can see, the queue has been moved to the end .. any idea ???

ok, some clarification.


this will move queue with .id to last position
this will move queue witdh ID before queue with ID2 this will move queues with ID, ID2, ID1 to the end in same order as in command in console we see:

yes, yes, yes


thank you...

thank you very much

using this command for change target-address:

if($linha['ip'] != $ip && $ip != ""){

require('includes/api/classeAPI.php');

$API = new routeros_api();

$API->debug = true;

if ($API->connect($ip_mk,$user_mk,$pass_mk)){
$API->write('/queue/simple/set',false);
$API->write('=numbers='.$login.'',false);
$API->write('=target-address='.$ip.'');
$API->read();
$API->disconnect();
} else {
die("Nao foi possivel conectar: ".$ip_mk);
}
}

response on v3.30 (RB411AH):


Connection attempt #1 to 189.75.174.52:8728... <<< [6] /login >>> [5/5 bytes read. >>> [5, 39] !done >>> [37/37 bytes read. >>> [37, 1] =ret=040a6caaeaf0610984b8def5df3a6df2 <<< [6] /login <<< [11] =name=admin <<< [44] =response=00db3d00d37f7ccd5ace78168ebabf903c >>> [5/5 bytes read. >>> [5, 1] !done Connected... <<< [17] /queue/simple/set <<< [33] =numbers=Felipe Nazario Lima Chen <<< [35] =target-address=10.2.2.9,10.2.2.100 >>> [5/5 bytes read. >>> [5, 35] !trap >>> [26/26 bytes read. >>> [26, 8] =message=unknown parameter >>> [5/5 bytes read. >>> [5, 1] !done Disconnected...


response on v3.23 (PC x86):

Connection attempt #1 to 200.138.161.132:8728... <<< [6] /login >>> [5/5 bytes read. >>> [5, 39] !done >>> [37/37 bytes read. >>> [37, 1] =ret=c6ce2fc945a3cc973a201996300594c5 <<< [6] /login <<< [11] =name=admin <<< [44] =response=000030986a1214543ff4dd978fa08049fd >>> [5/5 bytes read. >>> [5, 1] !done Connected... <<< [17] /queue/simple/set <<< [22] =numbers=Paulo Martins <<< [29] =target-address=192.168.96.14 >>> [5/5 bytes read. >>> [5, 1] !done Disconnected...


whats a problem with v3.30 on target-address parameter ? help please...

howwwwwwwwwwwww howwwwwwwwww


in v3.30 parameter "target-address" is changed to "target-addresses"


thankssssss all

in v3.30 parameter "target-address" is changed to "target-addresses"

actually, v3.23 simply allowed shortened parameter names (you can use 'target-a' in v3.23). as far as I remember, it was me who advised to remove that feature from API