Hi People,

I tried to connect a Network via WDS...

http://wiki.mikrotik.com/wiki/Transpare ... o_Networks

I tried this Tutorial, but I can see the AP but I can't connect to it, whether with the station, nor an other w-lan client... but I don't know why...
I did all steps, like they're explained there, but I don't get it work

I have two RB411 wtih RouterOS3.10 ...

Thanks

Michael

first off all upgrade to the latest version RouterOS 3.22 and do the setting again you have missed something; the settings from the site are correct I use them to.

Best Regards Remus

Look carefully to the settings, there must be the same at both ends (both APs). The tutorial works 100%. In your case you've probably forgot to enable dynamic wds or nstream at one end. Check again! Good luck!

I have te same problem cant get a connection how do you solve the problem

regards michael

Hi ,,

First upgrade your OS ,,

Second follow the commands " use the consol commands " in both ended and you will get it work , the exampl will work 100% i have tried it here and its working fine .


Regards

I have te same problem cant get a connection how do you solve the problem

regards michael

Hi,

i set the RB411s back to factory-defaults, and used the manual step by step... but it doesn't work...

can anybody post his config please? -> I'm shure it's just a small mistake! But I can't find it...

I updatet the FW to v3.24 .

Best regards

Michael