Community discussions

MikroTik App
 
User avatar
thebest1
just joined
Topic Author
Posts: 10
Joined: Sat May 09, 2009 9:17 pm

Please Help ... my system always Crash

Sun May 10, 2009 1:02 pm

can anyone help me ... i just install Mikrotik V3.23 , every thing ok ,, beforre i install the hotspot , once i install the hotspot the all system crash after between 30 to 40 minute , i was using before V2.9 and was working fine in the same computer , but i decide to upgrade to V3.23 to enhance the load balance between 3 wan connection .
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26912
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Re: Please Help ... my system always Crash

Mon May 11, 2009 11:00 am

what do you mean by 'crash'? can you post a picture of what happens?
 
User avatar
thebest1
just joined
Topic Author
Posts: 10
Joined: Sat May 09, 2009 9:17 pm

Re: Please Help ... my system always Crash

Tue May 12, 2009 1:14 am

Crash it mean the system not responding , and the ping session on the router stop ( from my IP address ,,, Request time out and destination host unreachable ) , and when i connect monitor on the router and click enter login to see the log .. not respond ,,, so i make force restart ,,, return work again 30 -to- 40 min then crash again
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26912
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Re: Please Help ... my system always Crash

Tue May 12, 2009 9:45 am

after reboot, immediatelly make supout.rif file and send to support.
 
User avatar
thebest1
just joined
Topic Author
Posts: 10
Joined: Sat May 09, 2009 9:17 pm

Re: Please Help ... my system always Crash

Tue May 12, 2009 11:18 am

thanks , for your help , and as u said i will active the hotspot and send support.rif to the support@mikrotik when the problem repeating

other favor , may u help me to make load balance between 3 ADSL line , mainly i upgrade to V3.23 because that , so i will describe my system scenario ,

i have 3 ADSL X 2MB (PPPOE from the same provider )

LAN IP = 10.0.0.1/8
DSL1 _ Interface =xx.xx.xx.2 Router IP = xx.xx.xx.1
DSL2 _ Interface =xx.xx.xx.154 Router IP = xx.xx.xx.153
DSL3 _ Interface =192.168.1.2 Router IP = 192.168.1.1

i want to make load balance to make them 6 MB

when i search on the internet i saw some made load balance using MLPPP function and he saying this load balance working good , so may tell me how to make this step by step

and thanks for your help
Best Regards
 
leonset
Member Candidate
Member Candidate
Posts: 256
Joined: Wed Apr 01, 2009 9:09 pm

Re: Please Help ... my system always Crash

Tue May 12, 2009 11:35 am

Take a look at the wiki:

http://wiki.mikrotik.com/wiki/PCC#Notes

Keep in mind that PCC is not available yet, but the other methods described there are.
 
User avatar
thebest1
just joined
Topic Author
Posts: 10
Joined: Sat May 09, 2009 9:17 pm

Re: Please Help ... my system always Crash

Tue May 12, 2009 3:44 pm

thanks for your quick answer ,,, but i tried to make exactly like the PCC example but i stop when i add the below mangle rule because the router can't recognize this ( per-connection-classifier=src-address,dst-address:2/1 ) , also i try to get it by winbox , but i can't find it .


add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=src-address,dst-address:2/1 \
action=mark-connection new-connection-mark=wlan2_conn passthrough=yes
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26912
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Re: Please Help ... my system always Crash

Tue May 12, 2009 3:44 pm

this will only be supported in RouterOS v3.24, you have to wait for this version
 
User avatar
thebest1
just joined
Topic Author
Posts: 10
Joined: Sat May 09, 2009 9:17 pm

Re: Please Help ... my system always Crash

Tue May 12, 2009 3:48 pm

ohh :P , so there any other way to make effective load balance till the new release come ....
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26912
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Re: Please Help ... my system always Crash

Tue May 12, 2009 3:49 pm

again the same link:

http://wiki.mikrotik.com/wiki/PCC#Notes

in the NOTES section there are links to those other methods
 
User avatar
thebest1
just joined
Topic Author
Posts: 10
Joined: Sat May 09, 2009 9:17 pm

Re: Please Help ... my system always Crash

Tue May 12, 2009 4:06 pm

i already made ECMP load balancing with masquerade , but as you see in attach screen shot i tried now with two DSL lines , one of them have the big traffic and the other one almost haven't traffic , and also i can see this on the other DSL2 router , because the activity led not like on the DSL1
You do not have the required permissions to view the files attached to this post.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8712
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Please Help ... my system always Crash

Tue May 12, 2009 4:52 pm

please decide whether you use Nth or ECMP. with ECMP you should only have 1 default route. just disable you 1st and 2nd routes
 
User avatar
thebest1
just joined
Topic Author
Posts: 10
Joined: Sat May 09, 2009 9:17 pm

Re: Please Help ... my system always Crash

Tue May 12, 2009 5:19 pm

i made exactly like what mentioned in below link ;

http://wiki.mikrotik.com/wiki/ECMP_load ... masquerade

and i see it based on one gateway

---------------------------------------------------------

i was using NTH load balancing , in V 2.9.51 but i thinks ECMP method should be better .

i don't know but relay iam suffering from trying , i try many way to load balance but no one of them effective with me , so i need personal experiment , i mean method u try it by your self and u find it the best way .
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8712
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: Please Help ... my system always Crash

Tue May 12, 2009 6:04 pm

I see
/ ip route
add dst-address=0.0.0.0/0 gateway=10.111.0.1,10.112.0.1 check-gateway=ping
I can't see all your other static routes in Wiki example...
 
User avatar
thebest1
just joined
Topic Author
Posts: 10
Joined: Sat May 09, 2009 9:17 pm

Re: Please Help ... my system always Crash

Wed Jul 22, 2009 12:48 pm

hii people ,, do u remember me ,, i still have crash issue when using ver 3.x , when i send support.rif file to support@mikrotik they told me to wait the new release , it will solve this issue , but today i tried ver 3.27 and still face the same problem when i open the hotspot the system crash after maybe 10 min ,, it working good with ver 2.x .... ??
may please advise ,,, what's ganna do ?

Best Regards

Who is online

Users browsing this forum: agus, CGGXANNX and 14 guests