Hi Guys

I see there is a dead thread from 2008 where someone asked a similar question but the answer doesn't quite help me out.
http://forum.mikrotik.com/viewtopic.php?f=9&t=28169

I'm having an issue with 2 RB600s on a remote farm hill location. During bad weather there seems to be some sort of electrical build up or short which forces both boards back to factory defaults. This means a 1hr drive and 1hr hike up the mountain each time this happens.

Now I obviously need to address this electrical issue, but in the mean time I need to buy myself some time.

What I'm wanting to do is edit the default-configuration script so that when the boards reboot they automatically load a certain backup file. I can't use a standard script to do this because when it gets set to defaults all the scripts disappear, but the backup files remain.

Is it possible and how can I edit this default script?

Thanks.

You cannot alter the autorun.scr to my knowledge. This is a good request.

you can do it, default is whatever was used when using Netinstall to install RouterOS. Reinstall by adding a certain rsc file and that will become your default.