Is this sector compatible with the routerboard 433
Weblink
http://www.l-com.com/item.aspx?id=22076

And how could i test the lmr 400 coaxil cable if its good or bad

it's all standard equipment and should work fine with your device. LMR400 is very commonly used cable.

Thank you for your reply I have worked with the router board 500r5 and 500 series they but the 433 is my first time I have just got a brand new board the 433 I put the three wifi cards on but now I want to login and configure the router I am using a 24volt Poe 0.83A when I assign the lan card static ip example 19.168.1.21 subnet 255.255.255.0 default gateway 192.168.1.1 it doesn’t show up on the win box if I try to let it assign dhcp it just says limited or no connectivity also the green and the blue light just stay on when I power it up how do I configure it?

post your configuration. either as winbox screenshots or as export code.

what you want me to post screen shots of the winbox when i try to look for the mac to login or what? this is the first time i am powering up this mikrotik board?

post screens of all configuration that you have applied to your router. anything you changed.

you can use free program like Zscreen or Jing to make screenshots quick and easy

i want to configure i can t cause i can 't login its the first time i have powered the mikrotik 433? do you get me now? or am i being difficult to explain my issue?

oh, I thought you assigned those addresses to the router. You mean your PC. In that case, please read this quick guide;

http://wiki.mikrotik.com/wiki/First_time_startup

thats my issue it want show up in the winbox the mac

1. disable firewall and antivirus in your windows pc
2. make sure your router first ethernet port is directly connected via crossover ethernet cable
3. run winbox as administrator
4. click the [...] button to find the MAC

nothing i have disabled antivirus firewall also the 433 is powered up through a stright cable over ethernet from poe i got a stright cable coming to my laptop? how do i make a cross over but do you think cause of a crossover it would not work do you want me to power up the board with crossover cable and stright cable to the computer or crossover from lan to my pc

did you turn on the RB433? did it beep? did the lights blink?

no beep no blinks thats what i was thinking too ? its the first time am oning it ova a 24volts 0.83 a poe with stright cable about 1 meter cable? the lights are just on green and blue their just staying on

its brand new man juz removed it from its cover do you think i should reset it?

i tried onther board and it beeps a brand new one i had 2 what do i do of the one that doesnt beep?

probably call the seller.

i live in africa bought the board from uae no way to get it working its basically not booting it just stop when powered up

any trouble shoots on how to repair it then send it back

@Normis,Pls any issue on cable i.e using crossover or straight cable to connect from RB433 to PC Lan? bcos I'm having problem with my RB433 connection I use straight cable to connect both Poe and Ether2.

does urz beep or does thee green light go off?

@Normis,Pls any issue on cable i.e using crossover or straight cable to connect from RB433 to PC Lan? bcos I'm having problem with my RB433 connection I use straight cable to connect both Poe and Ether2. :?

From the brochure:

Ethernet: Three 10/100 Mbit/s Fast Ethernet ports supporting Auto-MDI/X

no issue, MDIx is supported, so cable doesn't matter.

what do you mean by that did you check my post in the hardware section?

please don't cross-post. keep your questions in one topic.