i have netgear DG834g as Modem Mode to be as bridge and connect it to it's Lan Port to the Lan Port Of Mikrotik as Ether2
my problem when i made the pppoe and put user name and password of my ADSL ISP Provider but it didn't connect at all

i read this http://wiki.mikrotik.com/wiki/How_to_Co ... _xDSL_Line

but no success

what might be the problem?

Your modem/bridge is already connected as PPPoE client, isn't' it?
Do you have any options on Modem to setup private network on interface, which is going to RouterOS?

i really don't understand
all i did ,that make it bridge mode and i can access it through internal ip address like http://192.168.1.2

Hello,
I've got also routerboard as PPPoE client over ADSL modem. One thing is, if you have your modem setup properly. There are VCI and VPI parameteres of connection, which has to be correct for your ISP.

Also my configuration of PPPoE client is slightly different than the other in guide. Here's my `/ interface pppoe-client print`

Flags: X - disabled, R - running
0 R name="O2" max-mtu=1492 max-mru=1492 mrru=disabled interface=adsl
user="o2" password="o2" profile=default-encryption service-name=""
ac-name="" add-default-route=yes dial-on-demand=no use-peer-dns=yes
allow=pap,chap,mschap1,mschap2


I've got RB433AH, ROS v4.5, D-LINK DSL584-t