I am trying out V5.0b because of its support for the Intel ICH7M I/O controller on the X86 board I am using (so the ethernet interface shows up now, which is great).
Unfortunately, the PCI interface is doing something strange. I have tried RB11 and RB14 mini-PCI to PCI adaptor with various radio cards (SR71A, R52-350 and SR5), although the cards show up when I do a "system resource pci print", they do not appear in the interface list. They do appear under interfaces if I use an earlier version of RouterOS.
Does anyone have any suggestions, or do I just have to put off my testing until a later version comes out?
Code: Select all
[admin@MikroTik] > sys resou pc p
# DEVICE VENDOR NAME IRQ
0 03:04.0 Atheros Communications Inc. AR9160 802.11abgn Wirel... 11
1 02:00.0 Intel Corporation 82574L Gigabit Network ... 15
2 00:1f.3 Intel Corporation 82801G (ICH7 Family) SM... 15
3 00:1f.2 Intel Corporation 82801GBM/GHM (ICH7 Fami... 15
4 00:1f.1 Intel Corporation 82801G (ICH7 Family) ID... 255
5 00:1f.0 Intel Corporation 82801GBM (ICH7-M) LPC I... 0
6 00:1e.0 Intel Corporation 82801 Mobile PCI Bridge... 0
7 00:1d.7 Intel Corporation 82801G (ICH7 Family) US... 10
8 00:1d.3 Intel Corporation 82801G (ICH7 Family) US... 11
9 00:1d.2 Intel Corporation 82801G (ICH7 Family) US... 5
10 00:1d.1 Intel Corporation 82801G (ICH7 Family) US... 15
11 00:1d.0 Intel Corporation 82801G (ICH7 Family) US... 10
12 00:1c.3 Intel Corporation 82801G (ICH7 Family) PC... 15
13 00:1c.0 Intel Corporation 82801G (ICH7 Family) PC... 11
14 00:1b.0 Intel Corporation 82801G (ICH7 Family) Hi... 11
15 00:02.1 Intel Corporation Mobile 945GM/GMS/GME, 9... 0
16 00:02.0 Intel Corporation Mobile 945GME Express I... 11
17 00:00.0 Intel Corporation Mobile 945GME Express M... 0
Code: Select all
[admin@MikroTik] > int pr
Flags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU L2MTU
0 R ether1 ether 1500
