Graps not stored on disk

zodiac · Tue Oct 11, 2005 10:39 pm

Hi,

I have graphs enabled on RB532 with option store on disk (every 5min), but after reboot, graphs are empty. Where is problem ? Did I something wrong ? I thought, that graphs with 'store on disk' option enabled persists after reboot...

Tue Oct 11, 2005 11:40 pm

what version you are using ?
All graphs do not appear after reboot ?
post 'tool graphing export' result.

zodiac · Wed Oct 12, 2005 10:52 am

[admin@VLP InWay] tool graphing> export
# oct/12/2005 09:51:23 by RouterOS 2.9.5
# software id = 1TLC-xxx
#
/ tool graphing
set store-every=5min
/ tool graphing queue
add simple-queue=all allow-address=10.8.2.99/32 store-on-disk=yes allow-target=yes disabled=no
/ tool graphing resource
add allow-address=0.0.0.0/0 store-on-disk=yes disabled=no
/ tool graphing interface
add interface=Inway allow-address=0.0.0.0/0 store-on-disk=yes disabled=no
add interface=LAN allow-address=0.0.0.0/0 store-on-disk=yes disabled=no
add interface=DMZ allow-address=0.0.0.0/0 store-on-disk=yes disabled=no
[admin@VLP InWay] tool graphing>

zodiac · Wed Oct 12, 2005 10:53 am

Yes, all graphs are missing after reboot...

StoupaLutin · Tue Oct 18, 2005 1:35 am

Yes, all graphs are missing after reboot...

yes yes ... my graphs not stored on disk too

g3 · Tue Oct 25, 2005 9:05 pm

my graphs not stored on disk too, I have RB532 and lvl 5 v2.9.6

StoupaLutin · Tue Oct 25, 2005 9:53 pm

my graphs not stored on disk too, I have RB532 and lvl 5 v2.9.6

It's bug? ...

changeip · Wed Oct 26, 2005 12:07 am

I can confirm that on 2.9.6 it is same problem here. REbooted last night at midnight and lost my graphs.

Cool addition would be to also show 95th percentile on graphing : )

Sam

Wed Oct 26, 2005 4:38 pm

are you all using RouterBOARD500 ? do you use NTP as your time source, or is your clock not set?

g3 · Wed Oct 26, 2005 5:14 pm

are you all using RouterBOARD500 ? do you use NTP as your time source, or is your clock not set?

I use RouterBOARD500 and use NTP, my clock is set OK, my graphs not stored on disk

zodiac · Wed Oct 26, 2005 8:23 pm

Yes, all things are set correctly, but graphs are lost....

StoupaLutin · Thu Oct 27, 2005 12:19 am

Yes, all things are set correctly, but graphs are lost....

Yes ... I too. Clock is correct, but graphs not stored.

Ouu ... all at RB532.

changeip · Thu Oct 27, 2005 12:20 am

are you all using RouterBOARD500 ? do you use NTP as your time source, or is your clock not set?

We are using a SuperMikro 3ghz machine and NTP. Clock is set correctly even before NTP is queried and synced up.

Sam

Thu Oct 27, 2005 9:11 am

ok, we maybe found the problem

Serverwinkel.nl · Mon Oct 31, 2005 3:06 pm

I have a few rb532 boards and they all forget the time after reboot and they all forget the graphs after a reboot. I think this has something to do with eachother. Having a valid NTP server doesn't matter, because I think the graphing is started before the NTP time is set, thus the graphing is started with a time still set to jan 1st 2000.

Is it normal that the boards forget the time after a reboot?

lastguru · Mon Oct 31, 2005 3:49 pm

indeed it is normal (although I always thought you need to power-cycle the device to reset the clock, but I am not 1000% sure, though) as RB500 lacks the battery-sustained RTC support, so you have to use NTP.

Graps not stored on disk

Graps not stored on disk

yes ...

BUG? :(

yes

graphs and time