==hotspot bug?

cyb.0rg · Wed Nov 02, 2005 2:31 am

hi! (ver 2.9.6 , firewall+masq+queue)

I tryed to setup hotspot through winbox, after some configuration steps setup was completed and after that router was disconnected at all !
No connection to router and no connection from router to network ! ! !
It only possible to backup router ....

what is the problem ? ? ?

cyb.0rg · Wed Nov 02, 2005 2:54 pm

nobody uses hotspot ?
is it bug or it is my hands ?

acim · Wed Nov 02, 2005 3:35 pm

You probably made forbidden connections to all ehternet and/or wireless interfaces. You should login to your machine using console (keyboard + monitor) and disable problematic firewall rules. And check out safe mode in Mikrotik documentation, it is good idea to use it when you do setups like this.

cyb.0rg · Thu Nov 03, 2005 8:29 pm

i haven't "problematic" rules! all firewall rules accept incoming connection from lan !

anybody esle ?

daiceman · Thu Nov 03, 2005 11:42 pm

Have you tried connecting via mac-address?

daiceman · Thu Nov 03, 2005 11:47 pm

sorry, duplicate post

Fri Nov 04, 2005 9:22 am

Try to connect via Mac-Telnet or Mac-Winbox.

You need to login to the HotSpot system, if you want to access other resources.
Some hosts possible to reach without authentication, but some rules required for that (walled-garden, allows to access configured hosts without authentication).
IP-binding (/ip hotspot ip-binding) gives oportunity to access remote networks without authentication, with type=bypassed for desired HotSpot hosts.

larmaid · Fri Nov 04, 2005 12:06 pm

cyb.0rg
surely u will disconnect after u setup hotspot,u need to login to winbox something like this: connect to:x.x.x.x(router ip)/8081(default hotspot port).
cause hotspot will create a new port to let u login...!

Fri Nov 04, 2005 12:11 pm

larmaid,there should not be described problem with 2.9 version HotSpot routers accessing via Winbox.

larmaid · Fri Nov 04, 2005 12:17 pm

Fri Nov 04, 2005 12:40 pm

If I'm not mistaken, your explained issue was in 2.8 versions.

larmaid · Fri Nov 04, 2005 12:47 pm

@sergejs
now im using v2.9.6

Fri Nov 04, 2005 12:58 pm

You can only acces router via Winbox using 'x.x.x.x/8081' in connect to field ?
if you set another port, Router is unaccessible via Winbox ?

Do not forget to use latest Winbox, get it from http://demo2.mt.lv

larmaid · Fri Nov 04, 2005 1:11 pm

port 8081 is the default port for hotspot,but u can change it if you want..!
that port will be needed to login through winbox.....!

is there any diffrent with other winbox....?

cyb.0rg · Fri Nov 04, 2005 1:45 pm

heh .....
even pings don't go, and you are talking about winbox and port 8081
daiceman,
how it can be realized, using winbox,telnet ? (i can't)

sergejs,
maybe i am wrong, but why i have to login to the HotSpot system? if i even haven't access to router !

Fri Nov 04, 2005 1:50 pm

you have to open web-browser, if you see HotSpot login page, type login and password.
you should access Router after it.

If you want to access Router without HotSpot authorization, configure '/ip hotspot walled-garden ip' adding Router IP address or network.

larmaid · Fri Nov 04, 2005 2:16 pm

@cyb.0rg you want to access router using winbox or teknet.......!

if you want to use winbox in conect to:x.x.x.x/(port of hotspot u set for the default is 8081).

if you want to use telnet dont forget to enable port 23.

you want to ping from where and to where....?

larmaid · Fri Nov 04, 2005 2:17 pm

@cyb.0rg you want to access router using winbox or teknet.......!

if you want to use winbox in conect to:x.x.x.x/(port of hotspot u set for the default is 8081).

if you want to use telnet dont forget to enable port 23.

you want to ping from where and to where....?

make sure u setup the interface and hotspot corectly

Fri Nov 04, 2005 2:25 pm

larmaid, if you use latest Winbox and 2.9 RouterOS version.
You can set any port, Winbox will use 8291.
You can type to Connect to field x.x.x.x/xxxxx

larmaid · Fri Nov 04, 2005 2:40 pm

@sergejs what i mean is the default port after setup hotspot....!
sure we can change hotspot port.....

==hotspot bug?

==hotspot bug?

Who is online