Hi guys thanks for the supporters of this forum

please help me in routing

My isp providing WAN 2 ip's and lan 248 subnet

please help me in routing, here is the details

X.X.X.X/30 is my wan and iam having 3 ethernet cards for my mikrotik box

1 is configured with hotspot with private pool

2 configured with wan Ip's and getting internet to the private lan users

3 i have to configure the LAN public ip's which should be routed to X.X.X.X/30

my lan ip's Are x.x.xx/29


please help me in getting routed the above series and get the internet

Thanks,
Sp

simply add appropriate addresses to your router, like eth3: x.x.x.1/29, and then your LAN devices should have x.x.x.[2-6]/29, with gateway=x.x.x.1/29

simply add appropriate addresses to your router, like eth3: x.x.x.1/29, and then your LAN devices should have x.x.x.[2-6]/29, with gateway=x.x.x.1/29

It will be routed automatically ?

simply add appropriate addresses to your router, like eth3: x.x.x.1/29, and then your LAN devices should have x.x.x.[2-6]/29, with gateway=x.x.x.1/29

Simply great man how sweet of you iam adding kama thanks its working

Thanks,
SAthish

simply add appropriate addresses to your router, like eth3: x.x.x.1/29, and then your LAN devices should have x.x.x.[2-6]/29, with gateway=x.x.x.1/29

Chupaka can u please help me in configuring another thing in my router

the config needed is i want my whole network to be authenticated to the remote raduis manager for using hotspot mac authentication

please help me in configuring the NAS they are asking the NAS details i have to set a radius server in my router ?

and if yes there is the ip address coloumn should i mention the WAN i ip of my router over there ?

please resolve my question (requests)

Thanks

RADIUS Client settings are here: http://wiki.mikrotik.com/wiki/Manual:RADIUS_Client

if your hotspots will be authenticating via WAN interface, then yes - RADIUS will see WAN ip of your device