hi how ru guys,
i have network and i have wireless conntection users .
i want control the bandwidth .
i have 80 users and my download 1024k and 128k upload.
i have Pc with 2 ethernet and i want someone help me with the
Configration (Specialy with the Bandwidth)
ether1 public ether
ip 80.85.53.53
DNS
pri 64.68.43.43
sec 64.68.45.45
ether2 local ether
ip 10.5.50.1
subnet 255.255.255.0
dns ...
Please i want Config for bandwidth control for users
(((((( equal bandwidth sharing between users))))))
plz step by step help
THANKS I WILL BE GRATEFUL/
SFQ to share bandwidth
You have a couple of choices:
1) Create a simple que for each user with max-limit down at 1024 and max-limit up at 128 and limit-at down at 1024/8 = 128k and limit-at up at 128/8= 16. This way if one person wants to use the network and no-one else is using it then they get the full bandwidth, but if everyone is using the network then each person gets a 128 down 16k up pipe. But pain to create 80 queues manually.
2) Use hotspot to create queues dynamically.
3) Set up a PCQ queue on the upstream (to internet) link using src-address and pcq-classifier as IP address. This way each person will get their share of the available link (http://www.mikrotik.com/docs/ros/2.9/root/queue) . This is probably the easiest.
Kinda depends if you just want to equalize access to the network or really want to limit people to their % of the network.
Let me know if questions.
Regards,
Paul
1) Create a simple que for each user with max-limit down at 1024 and max-limit up at 128 and limit-at down at 1024/8 = 128k and limit-at up at 128/8= 16. This way if one person wants to use the network and no-one else is using it then they get the full bandwidth, but if everyone is using the network then each person gets a 128 down 16k up pipe. But pain to create 80 queues manually.
2) Use hotspot to create queues dynamically.
3) Set up a PCQ queue on the upstream (to internet) link using src-address and pcq-classifier as IP address. This way each person will get their share of the available link (http://www.mikrotik.com/docs/ros/2.9/root/queue) . This is probably the easiest.
Kinda depends if you just want to equalize access to the network or really want to limit people to their % of the network.
Let me know if questions.
Regards,
Paul