Community discussions

MikroTik App
 
matze502
just joined
Topic Author
Posts: 6
Joined: Wed Nov 10, 2010 10:37 am

DHCP-Relay to Win 2003 DHCP-Server

Wed Nov 10, 2010 11:02 am

Hello,

I've some problems setting up my RB750G.
I need to redirect the DHCP-requests from different VLAN's to my DHCP-Server. Here's my config:

[admin@MikroTik] /ip dhcp-relay> print
Flags: X - disabled, I - invalid
# NAME INTERFACE DHCP-SERVER LOCAL-ADDRESS
0 VLAN50 Schulungsraum5 192.168.179.100 192.168.50.254
1 VLAN60 Schulungsraum6 192.168.179.100 192.168.60.254
2 VLAN40 Schulungsraum4 192.168.179.100 192.168.40.254

I've also set up the scopes for the VLAN's on the server but didn't receive an IP-address in each of the vlan's.
Ping tests from each of the vlan's to the DHCP-Server are successful.

I hope, I can get some help here and sorry for my bad english. I'm from germany. :)

Thanks!!
 
fmenard123
Member Candidate
Member Candidate
Posts: 100
Joined: Sat Aug 02, 2008 6:43 am

Re: DHCP-Relay to Win 2003 DHCP-Server

Wed Nov 10, 2010 4:39 pm

Have you tried another DHCP server ? Say ISC DHCPD on Linux ? And turn-up the relay start-up option on the daemon ?

I once had an ISC DHCPD server with over 200 scopes, in 200 different IP subnets, but this was in a ROUTING environment.

I'm seeing that you are trying to achieve this in a BRIDGING environment and this may be an issue.

F.
 
matze502
just joined
Topic Author
Posts: 6
Joined: Wed Nov 10, 2010 10:37 am

Re: DHCP-Relay to Win 2003 DHCP-Server

Thu Nov 11, 2010 9:23 am

Hi!

Thanks for your reply!

I'm not sure, what you mean with bridging environment? I'm using this router to route between some vlans. The Router is on on a port of a manageable switch and on that switch where different vlans/subnets on each port. Cisco is calling that Router-on-a-stick.

I haven't tried a Linux server yet but I'll give it a try.
 
fmenard123
Member Candidate
Member Candidate
Posts: 100
Joined: Sat Aug 02, 2008 6:43 am

Re: DHCP-Relay to Win 2003 DHCP-Server

Thu Nov 11, 2010 2:22 pm

I'm saying that if the DHCP server has a route to each of the VLANs in which it has a SUBNET in which it will assign IP's it should work.

If on the other end, you only have a DHCPD server with multiple interfaces on a VLAN-ified Windows NIC, and you try to make use of the DHCP server on Windows to relay to a RouterOS Box, which has a leg into each VLANs.

If this makes a difference for you, go ahead and hit the Give Karma (to me...) button on the wiki.

F.
 
SSI
just joined
Posts: 17
Joined: Mon Jan 27, 2014 1:35 pm
Location: Queenstown, NZ
Contact:

Re: DHCP-Relay to Win 2003 DHCP-Server

Wed Mar 09, 2016 10:46 am

Hi Matze502,

Sorry to warm up this cold case, but did you ever find a solution to your challenge? As I am facing the very same issue with a win2012 R2 DHCP server and a RB751U-2HnD.

Cheers,
Stefan

Who is online

Users browsing this forum: McSee, phascogale, yhfung and 11 guests