setup a mikrotik for ICS but i only have access to mikrotik using terminal , cant access the router throught LAN.
i have add another LAN on it but same cant access throught LAN
can you tell me how to fix it?

Check out this guide: http://wiki.mikrotik.com/wiki/Manual:First_time_startup

i want to have lanaccess

what do you mean by you can access from the terminal but not lan (local area network)? do you have a routerboard or is it on x86?

yes Local are network and its x86 do i have to creat new route or ..?

does it detect your intefaces?

[admin@MikroTik] > /interface print
Flags: X - disabled, D - dynamic, R - running
# NAME TYPE RX-RATE TX-RATE MTU
0 R ether1 ether 0 0 1500
1 R wlan1 wlan 0 0 1500
2 R pppoe-out1 pppoe-out 0 0 1480
[admin@MikroTik] >

Are you trying to access it via winbox using the discovery button?
If you don't see any router using the discovery button of the winbox,
first make sure no firewall is blocking winbox.
Then, it could be that the neighbor discovery interface is disabled.
Try to see if it is disabled:

[admin@MikroTik] > /ip neighbor discovery print
# NAME DISCOVER
0 ether1 yes
1 wlan1 yes
2 pppoe-out1 no
[admin@MikroTik] >

The discovery is enabled, so you should be able to see the router from winbox
when you press the discovery button.
If you still don't, try from another PC, download the new winbox if necessary,
disable any firewall in your PC, check cable connections.