Wireless problem see this!!!

proxy · Wed Dec 21, 2005 1:24 pm

I have a problem with my wireless. at first i was using v2.8.28 and this problem was shown , i upgraded to 2.9.6 and i think i have the same problem , Plz see this screenshot of one of my AP and post your comments what the problem can be!

djape · Wed Dec 21, 2005 1:31 pm

Well, it's a picture

Come on dude, how can we help just by lookin' da picture?!
Does your clients get disconnected or what.
Fill us with more information's dude

Wed Dec 21, 2005 1:42 pm

What is your problem

?

I suggest you to use 'Torch' tool for real-traffic monitoring.

proxy · Wed Dec 21, 2005 3:21 pm

nope, the clients doesn't disconnect but when betwen the traffic lines are spaces like in the picture , the clients get TIME OUT , maybe 2 or 3 timeout's

djape · Fri Dec 23, 2005 12:00 am

Turn of default forwarding for each user in wireless access list...

proxy · Sun Dec 25, 2005 12:44 am

Turn of default forwarding for each user in wireless access list...

thats now working man

anyone has an idea what the problem can be..

i'm using bridge connections the wireless accesspoint router has no firewall rules , no simple queues , just 3 prismII cards runing in ap mode..

mikapojic · Fri Dec 30, 2005 8:01 pm

On what freq are those cards working?

cibernet · Sat Dec 31, 2005 3:58 pm

Please post your wireless configuration....

proxy · Sun Jan 01, 2006 4:35 pm

Here's my config...

interface wireless> print                     
Flags: X - disabled, R - running 
 0  R name="Wlan" mtu=1500 mac-address=00:02:6F:xx:xx:xx arp=enabled disable-running-check=no interface-type=Prism 
      prism-cardtype=200mW radio-name="00026F365B9C" mode=ap-bridge ssid="wlanap" area="" frequency-mode=superchannel 
      country=no_country_set antenna-gain=0 frequency=2437 band=2.4ghz-b scan-list=default rate-set=default 
      supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps basic-rates-b=1Mbps max-station-count=2007 tx-power-mode=default 
      periodic-calibration=default dfs-mode=none antenna-mode=ant-a wds-mode=disabled wds-default-bridge=none 
      wds-ignore-ssid=no update-stats-interval=disabled default-authentication=no default-forwarding=yes 
      default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default disconnect-timeout=3s 
      on-fail-retry-time=100ms preamble-mode=long compression=no allow-sharedkey=no 

 1  R name="Wlan2" mtu=1500 mac-address=00:02:6F:xx:xx:xx arp=enabled disable-running-check=no interface-type=Prism 
      prism-cardtype=200mW radio-name="00026F39F5F9" mode=ap-bridge ssid="wlanap2" area="" frequency-mode=superchannel 
      country=no_country_set antenna-gain=0 frequency=2457 band=2.4ghz-b scan-list=default rate-set=default 
      supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps basic-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps max-station-count=2007 
      tx-power-mode=default periodic-calibration=default dfs-mode=none antenna-mode=ant-a wds-mode=disabled 
      wds-default-bridge=none wds-ignore-ssid=no update-stats-interval=disabled default-authentication=yes 
      default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default 
      disconnect-timeout=3s on-fail-retry-time=100ms preamble-mode=long compression=no allow-sharedkey=no 

 2  R name="wlan1" mtu=1500 mac-address=00:02:6F:xx:xx:xx arp=enabled disable-running-check=no interface-type=Prism 
      prism-cardtype=200mW radio-name="00026F3691E4" mode=ap-bridge ssid="wlanap1" area="" frequency-mode=superchannel 
      country=no_country_set antenna-gain=0 frequency=2412 band=2.4ghz-b scan-list=default rate-set=default 
      supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps basic-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps max-station-count=2007 
      tx-power-mode=default periodic-calibration=default dfs-mode=none antenna-mode=ant-a wds-mode=disabled 
      wds-default-bridge=none wds-ignore-ssid=no update-stats-interval=disabled default-authentication=no 
      default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default 
      disconnect-timeout=3s on-fail-retry-time=100ms preamble-mode=long compression=no allow-sharedkey=no

mikapojic · Sun Jan 01, 2006 5:42 pm

Could scan for oter AP`s in area and post your results.

proxy · Sun Jan 01, 2006 9:01 pm

here is the scan

Flags: A - active, B - bss, P - privacy, R - routeros-network, N - nstreme 
      ADDRESS           SSID    BAND       FREQ SIG RADIO-NAME       
AB    00:0F:B5:xx:xx:xx SSID1    2.4ghz-b   2412 -79
AB    00:02:6F:xx:xx:xx MyWlan1 2.4ghz-b   2437 -45
AB    00:02:6F:xx:xx:xx MyWlan2 2.4ghz-b   2457 -49
AB    00:02:6F:xx:xx:xx SSID2-   2.4ghz-b   2452 -71
AB    00:0F:B5:xx:xx:xx SSID3    2.4ghz-b   2462 -83
AB    00:02:6F:xx:xx:xx SSID 4   2.4ghz-b   2422 -59
AB    00:02:6F:xx:xx:xx SSID5    2.4ghz-b   2442 -42
ABP   00:02:6F:xx:xx:xx SSID6   2.4ghz-b   2447 -60
AB    00:0F:3D:xx:xx:xx SSID7   2.4ghz-b   2412 -82

artist1 · Mon Jan 02, 2006 5:54 am

Time outs are comon in wireless. Your link is bad, too much noise, other interferences or weak signal causes this.

mikapojic · Mon Jan 02, 2006 12:04 pm

Try using this chanels:
1. 2412
2. 2427
3. 2462

And tell me what kind of antenna are you using. 120 sector or?

proxy · Mon Jan 02, 2006 7:04 pm

i tried those channels , but it's same:S
yes i'm using 120* sector anntenas

Wireless problem see this!!!

Wireless problem see this!!!

Interfirance

Re: Interfirance

Who is online