Hi

I currently have a mikrotik 433 acting as a PPPOE server issuing IP addresses to the wireless clients in the 10.0.0.0 range.
The clients have internet access once the pppoe connection is established.

The mikrotik pppoe server has an IP of 10.0.0.254, however the wireless interface has an ip of 192.168.0.254.

I have 2 cpe's creating PPPOE connection to the Mikrotik server:

10.0.0.101
10.0.0.67

Than LAN ip addresses of each CPE are

192.168.101.1
192.168.67.1

I have 2 computers connected to either lan port of cpe's.

192.168.101.x
192.168.67.x

How can i allow access from one computer to the other.

If i do a trace Route from the one pc to the other i get:

Tracing route to 192.168.101.X over a maximum of 30 hops

1 <1 ms <1 ms <1 ms 192.168.67.1
2 4 ms 3 ms 1 ms 10.0.0.254
3 192.168.0.254 reports: Destination host unreachable.

Please assist