Currently I have several x86 based routers running RouterOS, I run a sata X25M Intel SSD for RouterOS, and a 2nd sata 1tb Western Digital Black for caching.
However unless I have missed the boat I can't find a way to have Calea save to anything except the primary drive. I need lots of storage and having the ability to save to a second or third drive would rock.
Ideally:
drive1=RouterOS
drive2=cache
drive3=calea


Thanks,
Josh

You can save Calea information to any folder, case-name - case name is set on server to specify the folder, where intercepted data is stored
http://wiki.mikrotik.com/wiki/Calea

You can save Calea information to any folder,

Code: Select all

/tool calea set case-name=CF/calea_info

case-name - case name is set on server to specify the folder, where intercepted data is stored
http://wiki.mikrotik.com/wiki/Calea

Perfect!

Thank you,
Josh

You mean , i have to pre format with ext2 and create the desire folder on the 3rd drive before configuring the calea

Please make it clear , iam successful in configuring calea and retention server , but egarly looking for this solution

i just attached second drive its raw now can u please tell me the steps .......

You can save Calea information to any folder,

Code: Select all

/tool calea set case-name=CF/calea_info

case-name - case name is set on server to specify the folder, where intercepted data is stored
http://wiki.mikrotik.com/wiki/Calea

Please make it clear , iam successful in configuring calea and retention server , but egarly looking for this solution

i just attached second drive its raw now can u please tell me the steps .......

You can save Calea information to any folder,

Code: Select all

/tool calea set case-name=CF/calea_info

case-name - case name is set on server to specify the folder, where intercepted data is stored
http://wiki.mikrotik.com/wiki/Calea

Perfect!

Thank you,
Josh

Please make it clear , iam successful in configuring calea and retention server , but egarly looking for this solution

i just attached second drive its raw now can u please tell me the steps .......

Thanks

Run /store disk print and format secondary drive attached to your router.
Check /files to confirm name given to your disk and use in the described way.

Run /store disk print and format secondary drive attached to your router.
Check /files to confirm name given to your disk and use in the described way.

In this case my DIsk in SATA2

can i use casename=SATA2 ?

Thanks,
Sathish

Format disk by store commands and check /files menu for correct name.

Format disk by store commands and check /files menu for correct name.

Its not working for me

iam trying like this

/ tool calea add action=pcap intercept-port=5555 case-id=333 intercept-ip=192.168.240.99 case-name=sata2/calea

where sata2 is my second drive, nothing works
and

/ tool calea add action=pcap intercept-port=5555 case-id=333 intercept-ip=192.168.240.99 case-name=calea

where i created a folder on sata2 drive as calea, it worked but the calea named folder created automatically under calea-admin folder on sata1(system drive)

ROS version 5.7 latest

Please give me the solution

Thanks,
Sathish

Have you followed instructions?

1) Did you format disk?
2) What do you see at /files print?

Format disk by store commands and check /files menu for correct name.