Hello guys,

i'm updating a RB433 form ROS 4.7 to the latest 5.11.
After copying the .npk to files menu in winbox, and reboot it.
I cannot ping the RB433 IP and it cannot detected with winbox.

The eth0 seems to be working when i plug it to a switch port, but i cannot detect anything.

What should i do ? If i have to take the RB433 down from the tower and push the reset button,
is it gonna solve the problem ?

Thanks for your help.

Paul

no that will not solve the problem
you will have to format the mt by consol cable
this will solve the problem .


give karma if i helped you

Hello guys,

i'm updating a RB433 form ROS 4.7 to the latest 5.11.
After copying the .npk to files menu in winbox, and reboot it.
I cannot ping the RB433 IP and it cannot detected with winbox.

The eth0 seems to be working when i plug it to a switch port, but i cannot detect anything.

What should i do ? If i have to take the RB433 down from the tower and push the reset button,
is it gonna solve the problem ?

Thanks for your help.

Paul

If you can physically get access to the board's connection at the bottom of the tower via it's CAT5 connection, have you tried connecting via MAC-WInbox? Does it get listed when you click the [...] search button in WInbox?