will mikrotik make SwOS with 16/32/48 ports someday? is there any plan soon already?

i will buy it soon.

i will buy it soon.

i depend on the price but as usual, mikrotik's price range is affordable

yes me too, therefore i like Mikrotik RouterBoard, and also full featured and very friendly.

ok, working on it

ok, working on it

horray..

thanks MikroTik.

ok, working on it

horray..

thanks MikroTik.

but no promises! I'm just saying we will consider the possibilities

no problem Mr.Normis, but at least mikrotik have plan about producing switchs with many variants.

thanks in advance.

I prefer 8p - that would be something.

I will buy a higher density switch definately! A rackmount 24 port switch would be perfect

just make sure you have ample ASIC's mikrotik

ok, working on it

to hear this. if it is affordable, gonna change all my unmanageable switches into SwOS

Is there something new about 16/24/48? Canceled? Will be, when?
Something approximate, April, May, September, 2012, 2013?

RB780GUP will be a nice choice for base stations. Now I must use a gigabit switch+2xRB750UP, 3 devices.

Anymore news on the 16/24/48 port switches?

mikrotik must have a powerfull switch

250GS is great!, I buy a lot of them...
But I need more than five ports in several cases, so I must buy not Mikrotik
I hope that soon there with more than 5 ports

if you need a 26 Port GBE router you might consider this device for RouterOS
Axiomtek NA-550: http://axiomtek.com/products/ViewProduct.asp?view=928

Gigabit PoE OUT for several ports would be nice feature for 8 and 16 ports versions

Is there something new about 16/24/48? Canceled? Will be, when?
Something approximate, April, May, September, 2012, 2013?

Dear Mikrotik, questions are still valid

if you need a 26 Port GBE router you might consider this device for RouterOS
Axiomtek NA-550: http://axiomtek.com/products/ViewProduct.asp?view=928

have you tried the axiomtek NA-550 or NA-551 with routerOS ?

what is the maximum disk capacity ROuterOs can handle ?

I am thinking that larger switch from mikrotik is on thin ice. There is no any info about that for almost 2 years.

ok, working on it

That product would be really interesting. I hope price will be too

ok, working on it

horray..

thanks MikroTik.

but no promises! I'm just saying we will consider the possibilities

hi Normis, any progress ?
I am waiting for routerboard cloud router with 48 ports almost two years

up

It's anybody here ?

up
up up

Ethernet switching market today its very complicated

at this moment designing a new product involves very difficult decisions

i think mikrotik its deciding about 2.5g and 5g ethernet... i hope


polishing CRS development and including it on certification and training maybe its a good idea to formalize switching portfolio


+1

up up
I need this....

ok, working on it

horray..

thanks MikroTik.

but no promises! I'm just saying we will consider the possibilities

Redundant Power supplys and SFP's 1:1 ie 20 spf and 2 sfp+ or 40 sfp and 4 sfp+
we have 10sfp + 1sfp+ but we need bigger of the same so save space in closet. and offcourse redundant (perhaps optional for pricepoint / servicability) PSU+s
Perhaps one with 8 sfp+ and 2 qsfp+
Please support setting the wavelength of inserted sfps! (The tunable ones that is)

Do people still want SwOS instead of some kind of CRS?

There are times that the simplicity of switch is nice.  I recently had to think about that one myself, and elected to get the RB260GS switch.  I only needed 5 ports, but I also have two 48 port HP managed switches at my house (neither are fully loaded).  However, speculating on what a 24 port version of a RB260 would cost vs what  a CRS does cost, it likely does not make much sense for MikroTic to develop a 24 port switch only.

Jim

up 
for 48port switch and ccr

take my money

up
ccr with 48ports pls
ideal with sfp+ port for uplink

How would you use so many ports on router? Are you routing between 30 different networks at one place?

I think the concept would more of a large switch - that "oh by the way" has a router in it too. Personally I have two 48 port HP managed switches at home (although neither is anywhere near fully loaded).


Sent from my Droid Turbo via Tapatalk, so blame any typos or spelling errors on Android

I think the concept would more of a large switch - that "oh by the way" has a router in it too. Personally I have two 48 port HP managed switches at home (although neither is anywhere near fully loaded).

I use an HP 1920 at home, and I have 12 48-Port HP 1920 PoE's at my sites. I would kill for a nice high-end MikroTik PoE+ switch

btw - I'm not far from you - Rancho Cucamonga. Father lives in La Verne.

Gee, my father also lives in La Verne... Nice to see a local here...


Sent from my Droid Turbo via Tapatalk, so blame any typos or spelling errors on Android

What I need:

1) 48 port ethernet CRS with 2 x SFP - standard switch to compete with the Ubiquiti edgeswitch and other brands
2) 24 port SFP and 4 x SFP+ CRS switch. Something to compete with the Edge-core and netgear brands.
3) 24 port SFP+ and 2 x 40Gb SFP uplinks - or even toss the 40Gbps links and just have 24-28 SFP+ ports

Would be nice to have some sort of stacking features with the CRS - e.g use 5 of the same models above and only need to manage 1.

hello experts i am new here and i have a question . how to set cisco switch as a interface card in mikrotik is their any solution i wan to connect "attach " cisco switch to mikrotik as a interface like "ether1,ether2 and so on... " please kindly reply i'll be highly thank full .

hello experts i am new here and i have a question . how to set cisco switch as a interface card in mikrotik is their any solution i wan to connect "attach " cisco switch to mikrotik as a interface like "ether1,ether2 and so on... " please kindly reply i'll be highly thank full .

Wrong thread - search through existing threads or create a new one under General or beginner basics.

I would prefer when MikroTik focussed on what they do good (small routers and its firmware, WiFi equipment)
and leave the manufacturing of 48-port switches to the existing companies that provide a good product
at ever more reasonable price. It is not good to try to compete with those fully fledged products and then
always hear the whining about this-and-that-essential-feature that the MikroTik product lacks because the
developers are still frantically writing the firmware.
Better put those developers on RouterOS 7.

That said, it would be nice to have a switch-with-passive-PoE with a little more outputs, say up to 16.
The PowerBox has too few outputs for us and we don't need a router at that place either.
Ubiquiti makes suitable switches but the 8 and 16 port models have built-in PS which in this case (roof mounting)
would better be 24v DC over a separate wire.

any official statement ?

any official statement ?

Unlikely.. Official statements usually come at MUM events

Co-incidentally one of the two big events is coming up at the end of this month !

up again for 48ports switch CRS, more SFP+ ports = better switch for me

I need 8/16 port SWOS

ok, working on it

horray..

thanks MikroTik.

but no promises! I'm just saying we will consider the possibilities

We Need Fiber Dense ie: 40 sfp and 4sfp+ line rate. Aggregate 40 1g fibers to 4 10g fibers. redundant psu's like CRS317-40S-4S+RM / Dualbooting routeros and switchos offcource.

Up again.
CRS with 48ports and with some SFP+ ports also.
Shut up and take my money !

up up up
pls, make some CRS with 48 ports for us....

48 port switch with swos or routeros would be great (and poe+ if possible:))

I am SO HAPPY !!!!

CRS354-48P-4S+2Q+

ok, working on it

horray..

thanks MikroTik.

but no promises! I'm just saying we will consider the possibilities

https://mum.mikrotik.com/presentations/ ... 914661.pdf

Thanks for delivering no promises , ETA?

can't wait to get rid of the Netgear, Cisco switches

can't wait to get rid of the Netgear, Cisco switches

We have a stack of Netgear switches - each with 24 SFP ports. 4 switches so 96 ports but this continues to grow
Netgear provide a stacking kit so you can manage the stack as a single device but the same is possible using any of the ports on the front.
Would be great to ditch the Netgear kit and move to Mikrotik for all our core network.
Any news?

Sent from my ONEPLUS A6003 using Tapatalk