2.9.14 wireless problem

djdodo · Tue Mar 07, 2006 1:50 pm

i have client at 5500MHz,signal is -59db, 3x per day is TCP/IP communication between two sides dead.If i disable/enable CM9 on client side,so all works fine. In 2.9.13 and previous version is not this problem !!!

Tue Mar 07, 2006 6:20 pm

please make the support output file before disabling the interface and send it to support@mikrotik.com.

Also have you checked the periodical-calibration setting.

djdodo · Tue Mar 07, 2006 7:16 pm

Dear uldis, Periodic calibration is on 01:00:00 and DEFAULT.

please make the support output file before disabling the interface and send it to support@mikrotik.com.

Also have you checked the periodical-calibration setting.

tully · Wed Mar 08, 2006 11:14 am

Our routers show 60s as default. Maybe it was a number from an older router that was upgraded. A new install should have 60s as default.

John

djdodo · Fri Mar 10, 2006 1:02 am

problem was solved: this feature is manualy DISABLED and all works fine, now i test 2.9.16:)