New Products at the MUM Poland

Mon Mar 26, 2012 11:42 am

Product announcement video is online: http://www.tiktube.com/?video=qqfq3dlKi ... uplmomJGJ=
Accompanying PDF file: http://mum.mikrotik.com/presentations/PL12/PL12.pdf

ccr.jpg

engineertote · Mon Mar 26, 2012 12:02 pm

i Like CCR 1036 ,, is it ready to ship ??

Mon Mar 26, 2012 12:05 pm

If you watch the presentation, you will see that it will be ready to ship at the end of this summer (approximately).

engineertote · Mon Mar 26, 2012 12:15 pm

If you watch the presentation, you will see that it will be ready to ship at the end of this summer (approximately).

here is what you type in the presentation , nothing say about the availability of CCR

CCR 1036
• 36 core networking CPU
• 1.2GHz clock per core
• Greater than 8 mpps standard forwarding
• Greater than 15 mpps fastpath forwarding
• Up to 16Gbit/s throughput
• Ports directly connected to CPU
• 12x Gigabit ports
• 4x SFP ports
• Color touchscreen LCD display

Industrial grade super fast router with
brand new cutting edge CPU technology.
36 cores! Unprecedented power and unbeatable
performance - this is our new flagship device,
the Cloud Core Router.
If you need many millions of packets per second-
Cloud Core Router with
36 cores is your best choice!

We will wait it

honzam · Mon Mar 26, 2012 12:35 pm

In video presentation say this summer

Mon Mar 26, 2012 12:41 pm

That's why it says to "watch" and the PDF is only "Accompanying PDF", it means - not much sense to only read the PDF. More info is in the video.

I hope you like the other new products too!

EMOziko · Mon Mar 26, 2012 1:53 pm

WooooW!!!!! I allready love CCR 1036!!!

voxframe · Mon Mar 26, 2012 3:31 pm

normis, mark today on your calendar!
It is probably the first time I will say something with a smile on the forums

I like this... I like it a LOT!

I will be ordering some of these if the price is right

Ivoshiee · Mon Mar 26, 2012 3:44 pm

With all those millions of packets to float - does it accept 10G SFP+ modules?

Mon Mar 26, 2012 3:49 pm

Currently announced CCR1036 supports SFP only (SFP+ not supported).

c0d3rSh3ll · Mon Mar 26, 2012 7:48 pm

ram??
nand??

is beatifull ¡ ¡

Beccara · Tue Mar 27, 2012 2:57 am

It's a nice first step but it's a bit under whelming - It looks like you just threw more GHZ at it to route more, 43ghz of CPU to handle 16gbit and thats 16gbit that MT say, Remeber the RB1100? 3.2gbit of throughput but struggled with 1gbit with some actual config on it

Looks like MT have ignored the ASIC path or even the Cavimum path which will hurt. MT is entering a space with 10gbit+ routers that is much less forgiving than the "ISP's" they are used to now. It will be interesting to have a play with this and see what it can actually do in the real world but the design is very off

doush · Tue Mar 27, 2012 7:38 pm

Ship this right away. We very much need 2x of these urgently. June is very late.

estdata · Tue Mar 27, 2012 8:26 pm

can im tested thats router me ? send my home address

KillerOPS · Thu Mar 29, 2012 8:50 pm

i like the metal bullet

I was thinking it would be nice to have a integrated lnb-type bullet with a feeder, so it only needs to be put in a parabolic dish.
Did you think about this?
Also, any hope regarding gpon market this year? Or better stick with other brands for now?
Thanks normis.

timberwolf · Fri Mar 30, 2012 4:05 pm

I guess this router will be based on the Tilera TILE-Gx8036 CPU, which includes 16 SGMII Interfaces and is supported by Linux.
But if MT just throws their current software at this CPU, I bet we wont see any impressive performance. If however MT designs a new stack and network framework, then we might see some impressive performance. I don't think the "normal" Linux IP stack will scale well with this number of cores.

Gx8036 Datasheet http://www.tilera.com/sites/default/fil ... 010-01.pdf

estdata · Mon Apr 02, 2012 8:10 am

normis,
can I participate in training? If Yes, how do I get it from here. Whether a separate forum for training?

otgooneo · Thu Apr 05, 2012 5:51 am

I`m afraid that if MT can not launch CCR1036 within this summer (June to August). Hope CCR1036 will launch at time not like before RB2011 and RB1100 series.
Normis do you have any other news for CCR1036? Already tested and waiting for marketing? or technically not ready yet?

doush · Thu Apr 05, 2012 4:35 pm

Yes this is a very important product. Finally, it will save us from unreleiable x86 deployements.

Please give more info about this product.

Normis ?

Cris@usai.net · Thu Apr 05, 2012 5:10 pm

What will be the price point for this?

syadnom · Thu Apr 05, 2012 11:40 pm

What will be the price point for this?

ditto

mirhav · Sun Apr 08, 2012 6:08 pm

Normis Hi, can you give us more information about CCR-1036?

Mainly we are interested in the following points:

- It will run native 32bit or 64bit Mikrotik or virtualization and above Mikrotik
- Please explain the principle of fast forwarding packet? (wirespeed ?)
- Will include an ASIC?
- What will all be processed through the CPU and what hardware?
- How big will the RAM?
- They're going to have any major software changes in Mikrotik?

Please give us more information to your customers, you have some pieces made? Now tuning software? or is all just in a state of the project and yet chide whether it be so or so.

Please be open to us, we expect this product for years.

I think if we just plug into a bit of "development" so that you can only bring benefits.

For years, we expect a routeros on x64 platform .

Thank you for answer

Miroslav Havranec
gsnet.cz s. r. o.
Czech Republic

acim · Sun Apr 08, 2012 6:10 pm

Do you have some estimated price for this beauty?

vladturbuleasa · Thu Apr 19, 2012 2:08 pm

Interested 2 in this product , about the price , an estimation ?

Best Regards

Thu Apr 19, 2012 2:11 pm

estimated price has not been announced yet.

zyzelis · Fri Apr 27, 2012 9:56 am

Hello Normis,
I am interesting with RB 2011US-[2HnD(-IN)]
You promised ,that it will be available at the ending of March.
Now is the ending of April.....

SteveLamb · Fri Apr 27, 2012 4:20 pm

Hello Normis,
I am interesting with RB 2011US-[2HnD(-IN)]
You promised ,that it will be available at the ending of March.
Now is the ending of April.....

+1

mrz · Fri Apr 27, 2012 4:34 pm

Only 2011LS was promised at the end of March.

Other models were promised in april in following order:
2011LS-IN
2011L-RM
2011US-2HnD
2011US-IN
2011US(2HnD-IN)

w0lt · Fri Apr 27, 2012 4:47 pm

Only 2011LS was promised at the end of March.

Other models were promised in april in following order:
2011LS-IN
2011L-RM
2011US-2HnD
2011US-IN
2011US(2HnD-IN)

That's great that these products will be available at the end of April, but in the US, we haven't even seen the RB751G yet. Is there some problem in getting FCC certification on it? I believe it was announced before the 2GHz Groove models last year and this two products are already showing up in the US.... Seems like some kind of disconnect here.

-tp

Mon Apr 30, 2012 8:12 am

w0lt, FCC is holding us back, but we are doing all we can.

rooin · Fri May 11, 2012 11:52 pm

Is there a planned RB2011LS-RM or RB2011US-RM?

The indoor case is very nice, but would like Rackmount option.

ditonet · Tue May 15, 2012 1:45 am

@normis
What about RB2011 series NAND storage size???
There is no information about this on 'routerboard.com' site.

Regards,

Tue May 15, 2012 7:42 am

RouterBOARD devices come preinstalled with enough NAND to be able to run RouterOS. The size can vary, so we don't publish exact specs.

ditonet · Wed May 16, 2012 9:34 am

@normis

with enough NAND to be able to run RouterOS

OK, but what to do if I need to run hotspot with huge number of advertisement pages
and don't want to set external web server for that pages only?
Even RB1100AHx2 with license Level 6 (unlimited number of hotspot users) is unable to store these pages:
http://forum.mikrotik.com/viewtopic.php?f=3&t=60116
If MikroTik reduces NAND size on every new RouterBoard, there is a need for option
to store hotspot files on external storage, like Micro-SD card (feature request

).
I don't want to run RouterOS-based HotSpot on X86 platform because it is not
cost and energy efficient solution.

Regards,

Wed May 16, 2012 9:47 am

@normis
with enough NAND to be able to run RouterOS
OK, but what to do if I need to run hotspot with huge number of advertisement pages
and don't want to set external web server for that pages only?
Even RB1100AHx2 with license Level 6 (unlimited number of hotspot users) is unable to store these pages:
http://forum.mikrotik.com/viewtopic.php?f=3&t=60116
If MikroTik reduces NAND size on every new RouterBoard, there is a need for option
to store hotspot files on external storage, like Micro-SD card (feature request ).
I don't want to run RouterOS-based HotSpot on X86 platform because it is not
cost and energy efficient solution.

Regards,

You can already do that. Enter "\usb1\somename" or "\microsd\somename" after hotspot has been configured, and USB drive formated from the Store menu.

ditonet · Wed May 16, 2012 10:10 am

@normis

Enter "\usb1\somename" or "\microsd\somename"

If I understood you correctly, advertisement page must be set in this way?

add advertise-url=\microsd\somename\blahblah.html

Currently I'm looking for hotspot controller and if above example works, my choice will be RB1100AHx2

Regards,

Wed May 16, 2012 10:13 am

URL has always meant an external page. There is no way to store advertise page even on NAND. I was talking about other Hotspot pages (login, status, etc. where you can also instert your ads).

ditonet · Wed May 16, 2012 10:39 am

@normis

URL has always meant an external page.

It means that for advertisement pages external Web server is a must.
Thanks for help and clarification.

Regards,

Basdno · Sun May 27, 2012 1:58 pm

Hi,

Any news on when 2011US-2HnD-IN will be ready for order?

And how is the timeline for the amazing CloudCore CCR-1036 holding up so far? Can we still expect it end of this summer?!

(If you guys need someone to test it, I can humbly voulenteer!!!!!!!!!!

;D

Have a nice weekend all!

Mixiron · Sun Jun 17, 2012 11:27 am

it sounds great !
how much is the price ? approximately
is it working with X86 router OS or it has its own OS?

Basdno · Mon Jun 18, 2012 12:23 am

Bump, any news here???????!

w0lt · Mon Jun 18, 2012 1:43 am

I wouldn't get my hopes up to see this thing anytime soon. If the time it took to get the RB751G certified in the US is representative of how long it takes to get the wireless version of the RB2011 certified, then we will be in for a bit of a wait.

Lakis · Fri Jul 27, 2012 8:28 pm

When will come out PoE output switch? ( 24V PoE support for each port like OmniTIK UPA)
I think there was some presentation in Poland.

Who is online