Access two different network Range

wassimdaccache · Mon May 14, 2012 2:57 pm

Dear Friends

I configured my RB750 as following

 0   dhcp1     Public-Ethr2                 dhcp_pool       
 1   server1   Accountin...                 Accouting_rang

the range are the following:

 # ADDRESS            GATEWAY         DNS-SERVER      WINS-SERVER     DOMAIN  
 0 192.168.0.0/24     192.168.0.1    
 1 192.168.100.0/24   192.168.100.3

The Two Networks are using the same gateway to access the internet. I have made MANGLE to select the packet and used the below script to access the internet.

     0.0.0.0/0                          Cyberia PPPOE      1       
 4 ADC  192.168.0.0/24     192.168.0.1     Public-Ethr2       0       
 5 ADC  192.168.1.0/24     192.168.1.64    GatewayHDSL        0       
 6 ADC  192.168.100.0/24   192.168.100.3   Accounting-Ethr1   0

How can I remote a desktop on port 3389 from 192.168.0.0/24 in network 192.168.100.1/24 without going through the gateway.?

Kindly guys put me on the right direction

thanks in advance

tws101 · Thu May 24, 2012 12:07 am

You have placed them on different subnets.... By definition you need the router to connect them.

If you are on 192.168.0.0/24 and destination is on 192.168.100.0/24

Any request outside of 192.168.0.0/24 will be handed to the router for resolution.

Access two different network Range

Access two different network Range

Re: Access two different network Range