i ma trying to add simple que for a pppoe user his default speed is 8k/64k
the queue is added but not counting packets and bytes his default one is counting
here is my configuration


[admin@NT] queue simple> print
Flags: X - disabled, I - invalid, D - dynamic
0 name="joe" dst-address=10.11.3.254/32 interface=all parent=none priority=8
queue=default/default limit-at=8000/64000 max-limit=8000/64000
burst-limit=32000/256000 burst-threshold=32000/256000 burst-time=30s/1m30s
total-queue=default

1 D name="<pppoe-joe>" dst-address=0.0.0.0/0 interface=<pppoe-joe> parent=none
priority=8 queue=default/default limit-at=8000/64000 max-limit=8000/64000
total-queue=default
[admin@NT] queue simple>

i ma trying to add simple que for a pppoe user his default speed is 8k/64k
the queue is added but not counting packets and bytes his default one is counting
here is my configuration


[admin@NT] queue simple> print
Flags: X - disabled, I - invalid, D - dynamic
0 name="joe" dst-address=10.11.3.254/32 interface=all parent=none priority=8
queue=default/default limit-at=8000/64000 max-limit=8000/64000
burst-limit=32000/256000 burst-threshold=32000/256000 burst-time=30s/1m30s
total-queue=default

1 D name="<pppoe-joe>" dst-address=0.0.0.0/0 interface=<pppoe-joe> parent=none
priority=8 queue=default/default limit-at=8000/64000 max-limit=8000/64000
total-queue=default
[admin@NT] queue simple>

Use target address, but you can configure all that on the rate-limit on pppoe

hi cebernet can u give more details about how to use rate-limit with pppoe and does it work on 2.8 series or it is just for 2.9

cibernet what you mean by default in pppoe is it a new feature in 2.9.11 ?
thank you in advance

hi joseph yes it is found on the 2.9.11 version but i guess it is like the limits found on 2.8 unless we can use burst in it. hope somebody can explain it more

i ma trying to add simple que for a pppoe user his default speed is 8k/64k
the queue is added but not counting packets and bytes his default one is counting

hi joseph, did that worked with u, if yes can u post it cause i was a bit confused using target address

i ma trying to add simple que for a pppoe user his default speed is 8k/64k
the queue is added but not counting packets and bytes his default one is counting
here is my configuration


[admin@NT] queue simple> print
Flags: X - disabled, I - invalid, D - dynamic
0 name="joe" dst-address=10.11.3.254/32 interface=all parent=none priority=8
queue=default/default limit-at=8000/64000 max-limit=8000/64000
burst-limit=32000/256000 burst-threshold=32000/256000 burst-time=30s/1m30s
total-queue=default

1 D name="<pppoe-joe>" dst-address=0.0.0.0/0 interface=<pppoe-joe> parent=none
priority=8 queue=default/default limit-at=8000/64000 max-limit=8000/64000
total-queue=default
[admin@NT] queue simple>

Use target address, but you can configure all that on the rate-limit on pppoe

it means when you created the account for the user

you can define the rate-limit

I have the same problem. I solve it adding a fixed interface for each user, and adding a fixed simple queue to the same user, and it work!
I found that when i try to create a simple queue for a dinamic user, the queue not "catch" dinamic user interface, i solve this creating a fixed interface. sory for my english, i´m spanish spoken.

can you say how you put static interfaces on pppoe clients?

limitation occurs per user / per profile on PPPoE Server.
I've tested it... and it's really powerful
Regards,