Dear all,

I bought one mikrotik router board RB751-2HnD.i want configure it like bellow.

1.port 2 on ethernet configure ip 192.168.1.1
2.port 3 on ethernet configure ip 192.168.2.1
3.port 4 on ethernet configure ip 192.168.3.1 use hotspot

can anyone help me solve the case ?

thankss all for support

Try looking here.

http://wiki.mikrotik.com/wiki/Manual:IP/Address#Example
http://wiki.mikrotik.com/wiki/Manual:IP/Hotspot
http://wiki.mikrotik.com/wiki/Main_Page

thanks . i try it

Dear support ,

i have problem with my mikrotik router board RB751-2HnD
on interface WAN
-ip address add address=118.103.176.50 netmask=255.255.255.0 interface WAN
-ip dns set servers=8.8.8.8
-ip rout add gateway=118.103.176.1
-ip firewall nat add chain=srcnat action=masquerade out-interface=WAN

on interface LAN
-ip address add address=192.168.1.1 netmask=255.255.255.0 interface LAN
-ip dhcp-server> setup
-dhcp address space: 192.168.1.0/24
-addresses to give out: 192.168.1.2-192.168.1.200
----------------------------------------------------------
My mikrotik board have 5 port
i use wan port1 connect to ISP.
port 2 have ip 192.168.1.1
port 3 have ip 192.168.2.1
port 4 have ip 192.168.3.1
port 5 have ip 192.168.4.1

i need port 1,2,3,4,5 can communicate to each other.

can support help me solve this case ?

Thanks with regard ,