Hi All
Fairly new to networking and routeros so bear with me, does anyone have a general guide to setting up 3G on a ROS?
I have got a couple of 3g usb dongles and need to get them running as my sole connection. I have setup a ppp client on the 3g port but that is about it, I haven't setup any dhcp client etc as the 3g is not listed as an interface when selecting one to enable dhcp on.
is there a wiki guide for 3g somewhere?
Any help much appreciated!
Thanks,
Rich
Re: setting up 3g modem
we have several guides actually, this one will be for your situation:
http://wiki.mikrotik.com/wiki/Option_Gl ... _USB_Modem
http://wiki.mikrotik.com/wiki/Option_Gl ... _USB_Modem
Re: setting up 3g modem
aha! not sure how I didnt find that 
have got stuck though, when I run....
I do not get any response, I only get...
but I should be getting somthing like...
any idea's?
I might try another type of usb stick :-/
have got stuck though, when I run....
Code: Select all
[admin@rb411u] > /system serial-terminal usb2 channel=2
Code: Select all
[admin@rb411u] > /system serial-terminal usb2 channel=2
[Ctrl-A is the prefix key]
but I should be getting somthing like...
Code: Select all
[admin@rb411u] > /system serial-terminal usb2 channel=2
[Ctrl-A is the prefix key]
ATI
Manufacturer: Option N.V.
Model: GTM378
Revision: 2.3.3Hd (Date: Jul 17 2007, Time: 15:49:23)
OKany idea's?
I might try another type of usb stick :-/
Re: setting up 3g modem
I need some help, and I will be very great full if you can assist.we have several guides actually, this one will be for your situation:
http://wiki.mikrotik.com/wiki/Option_Gl ... _USB_Modem
I have a RB411u with a ZTE MF190 modem connected via usb, the modem does connect to the internet (See pic) as I am able to ping Yahoo.com.
But I can’t connect to the web via my pc ……
You do not have the required permissions to view the files attached to this post.
-
-
jandafields
Forum Guru
- Posts: 1515
- Joined:
Re: setting up 3g modem
You need to start a new topic, and not hijack this one... but it looks like you probably didn't setup NAT Masquerade. Don't forget to setup nat-masquerade and dns if you want pc's to connect to Internet through your router with a single public IP address!!!I need some help, and I will be very great full if you can assist.we have several guides actually, this one will be for your situation:
http://wiki.mikrotik.com/wiki/Option_Gl ... _USB_Modem
I have a RB411u with a ZTE MF190 modem connected via usb, the modem does connect to the internet (See pic) as I am able to ping Yahoo.com.
But I can’t connect to the web via my pc ……
Re: setting up 3g modem
will you post ppp-client confuguration
Re: setting up 3g modem
jandafields actually I do exactly all of the things in manial (wiki), but I can't get my ZTE MF190 to use 3G.
In compatibility table is written that I need to use data channel 3 (I can't because winbox said that it's not allowed) and info channel of 1 - this one is working.
Any idea please to fix my isue that internet is woring only on GSM compact...
Thanks!
In compatibility table is written that I need to use data channel 3 (I can't because winbox said that it's not allowed) and info channel of 1 - this one is working.
Any idea please to fix my isue that internet is woring only on GSM compact...
Thanks!