Community discussions

MikroTik App
 
Rattlehead
just joined
Topic Author
Posts: 20
Joined: Mon Mar 01, 2010 2:09 pm

[SOLVED] RB2011uas-2hnd reset issue

Fri Nov 09, 2012 9:37 pm

Hi guys.
Having some issue with a new rb2011uas-2hnd I have.
Applied filters & since then I can get a login prompt but it gives me a "wrong username and password" - strange.

Anyway trying to reset the unit. following
http://routerboard.com/pdf/423/rb2011U-qg.pdf instructions.

Its either doing one of two things loading with the config and still cant login or two it goes to ether boot and I cant see if in anyway to either boot using netinstall or anything else. Anyone have a suggestion or help?
Last edited by Rattlehead on Wed Nov 14, 2012 11:58 am, edited 1 time in total.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26912
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Re: RB2011uas-2hnd reset issue

Mon Nov 12, 2012 3:56 pm

what filters did you apply? maybe somebody else had access, and changed your username/pass?
 
Rattlehead
just joined
Topic Author
Posts: 20
Joined: Mon Mar 01, 2010 2:09 pm

Re: RB2011uas-2hnd reset issue

Mon Nov 12, 2012 7:13 pm

Hey Normis,
thanks for the reply. Filters are below and nope no one had access to the unit as it hadn't gone live yet.
0   ;;; Allow Related
     chain=input action=accept connection-state=related

 1   ;;; Allow Est
     chain=input action=accept connection-state=established

 2   ;;; Allow SSH access office
     chain=input action=accept protocol=tcp dst-port=22

 3   ;;; Allow Local Access
     chain=input action=accept src-address=172.29.1.0/24

 4   ;;; Create Port Scan List
     chain=input action=add-src-to-address-list protocol=tcp psd=21,3s,3,1 address-list=port scanners address-list-timeout=4w4d

 5   ;;; Drop Port Scan
     chain=input action=drop src-address-list=port scanners

 6   ;;; Log All then Drop
     chain=input action=log log-prefix=""

 7   chain=input action=drop
 
Rattlehead
just joined
Topic Author
Posts: 20
Joined: Mon Mar 01, 2010 2:09 pm

Re: RB2011uas-2hnd reset issue

Wed Nov 14, 2012 11:57 am

Got this issue sorted eventually.
Seemed to be an issue with Windows 7 and my USB - Serial adapter. Although the adapter was working ok with Windows 7 on Juniper/CISCO gear.

Anyway happy days unit reset and now working.
 
User avatar
g0n
just joined
Posts: 2
Joined: Mon Nov 19, 2012 10:31 pm
Contact:

Re: [SOLVED] RB2011uas-2hnd reset issue

Sun Nov 25, 2012 8:13 pm

I have the same problem.

For the RB2011UAS-­‐2HnD-­‐IN

Reset from the instructions --reset as in reset RouterOS configuration-- does not work!

It goes to ether boot or loads some other configuration.

Suggestions?
 
garrilas
just joined
Posts: 2
Joined: Thu Jan 09, 2014 4:16 pm

Re: [SOLVED] RB2011uas-2hnd reset issue

Thu Jan 09, 2014 4:23 pm

Hi.
I have the same problem with the RB2011UAS-­‐2HnD-­‐IN
device is not reset by instruction, only that I have - "ether boot" at boot.

Maybe this factory problem with this model?

Who is online

Users browsing this forum: Kuitz and 5 guests