Heloo,

I am trying to install MikroTik 5.22 on brand new Dell PowerEdge R210 II. The problem is that MikroTik does not recognize the HDD. The setting in bios is AHCI mode, there is no option to change it to SATA, ATA etc. Is there solution to my problem, or any advice that could help me.

TnX

Can you describe that part of the BIOS settings? I thought I had configured one of those to ATA mode.

Can you describe that part of the BIOS settings? I thought I had configured one of those to ATA mode.

Thank you for your replay. There is "SATA Settings". Inside there is "Embedded SATA"(my mistake on the first post, later i found there is ATA and RAID settings), but still I cant install MiktoTik 5.22. MikroTik cannot find the HDD.

Just to update the topic, I tried with demo version of MikroTik 5.6 and 5.11 and still no luck. Now I am planning to remove one hdd put on a desktop machine, install RouterOS and then return back to R210 II.

Send email to support see if controller is supported with detail description of ur PC
U can try installing on USB - if BIOS support boot from USB

Send email to support see if controller is supported with detail description of ur PC
U can try installing on USB - if BIOS support boot from USB

Thank you for your replay. Is there any difference between CD and USB install(for the controller support) ??

No no spike15mk
I wrote install on USB not from USB

No no spike15mk
I wrote install on USB not from USB

Sorry my mistake. Well I will wrote an email to support, and tomorrow I will remove one hdd and install MikroTik on desktop PC, then I will put it back in server(hopefully it will work). But I will not have raid this way...I am out of options

No no spike15mk
I wrote install on USB not from USB

Sorry my mistake. Well I will wrote an email to support, and tomorrow I will remove one hdd and install MikroTik on desktop PC, then I will put it back in server(hopefully it will work). But I will not have raid this way...I am out of options

Spike15mk ,
I was getting similar problems you could change HDD setting from AHCI to IDE and check again if it works for you. I was able to solve my problem like that

No no spike15mk
I wrote install on USB not from USB

Sorry my mistake. Well I will wrote an email to support, and tomorrow I will remove one hdd and install MikroTik on desktop PC, then I will put it back in server(hopefully it will work). But I will not have raid this way...I am out of options

Spike15mk ,
I was getting similar problems you could change HDD setting from AHCI to IDE and check again if it works for you. I was able to solve my problem like that

Mankomal,

Unfortunately there is no IDE settings in Dell PowerEdge R210 II. There is AHCI, ATA and RAID.

Spike,

I am trying to replicate your problem at my end ... you can add me on skype my id is singh.mankomal
I got this working 3 days back only on one of my servers with similar problems

There is AHCI, ATA and RAID.

i think ATA and IDE are the same thing

There is AHCI, ATA and RAID.

i think ATA and IDE are the same thing

I think so to. I read somewhere that is possible to remove SAS controller card and install then...

Spike,

I am trying to replicate your problem at my end ... you can add me on skype my id is singh.mankomal
I got this working 3 days back only on one of my servers with similar problems

Mankomal,

There is a 6 people on Skype with name like yours. Can you please add me. My name is bogdan.jeliskoski on Skype.

tnX

Unfortunately there is no IDE settings in Dell PowerEdge R210 II. There is AHCI, ATA and RAID.

As far as I know there is no RAID support in RouterOS.

The name you are looking for your SATA Setting is "ATA", which you indicated your Dell R210ii has.

if you absolutely need a RAID setup there is an overkill but effective solution:
- you can install RouterOS inside an VMWare ESXi hypervisor, which can be installed (and monitor) in RAID environments.

Hope it helps!

spike15mk cant find ur email
I dont want to expose this but anyway
make contact with this company -overnet com mk- I think u live in same area
maybe they can help u with that

spike15mk cant find ur email
I dont want to expose this but anyway
make contact with this company -overnet com mk- I think u live in same area
maybe they can help u with that

Thank you for the hint. I will check them today if I make the time