The speeds of my links are really horrid, lucky to get 2MB
the multipoints are set as AP Bridge
5GHz A/N
20/40 HT Above
The link is directly line of sight and only about 150m
signal is around -21/-40
signal to Noise is 76dB
Noise Floor -114dbm
any suggestions
Re: slow links
what equipment are you using? what antennas?
a noise floor that low is unbelievable imo.
a noise floor that low is unbelievable imo.
Re: slow links
made some changes implemented nstreme and nv2 still lucky to get above 20Mbs
using sector antennas (not sure of exact model as inherited this project) and a router board RB435G as central point, sextants SXT 5HnD connecting to this
unbelievable in what way?
the only thing that is a potential issue is we are cutting across power lines
using sector antennas (not sure of exact model as inherited this project) and a router board RB435G as central point, sextants SXT 5HnD connecting to this
unbelievable in what way?
the only thing that is a potential issue is we are cutting across power lines
You do not have the required permissions to view the files attached to this post.
Last edited by dimpo on Wed Jan 30, 2013 11:49 pm, edited 3 times in total.
Re: slow links
Signal is too high, set power to give -50+ , SNR is very high and probally caused by RF overloading, what is your CCQ?The speeds of my links are really horrid, lucky to get 2MB
the multipoints are set as AP Bridge
5GHz A/N
20/40 HT Above
The link is directly line of sight and only about 150m
signal is around -21/-40
signal to Noise is 76dB
Noise Floor -114dbm
any suggestions
Re: slow links
do not appear to have the ability to turn the power down on the Sextant or am missing something?