What's new in 6.0rc8 (2013-Feb-04 13:25):
*) ppp,pppoe,pptp,l2tp,sstp - only 2 change mss mangle rules are created for all ppp interfaces;
*) wireless - fixed AES encryption speed issues (upgrade suggested);
*) dhcpv6 server - handle info requests;
*) webfig - compressed all html resource files, speeds up opening of webfig page;
*) console - reduced width of address column in '/user print';
*) simple queues requires target arg to be specified when adding;
*) do not count packets for unknown protocols as rx_dropped;
*) snmp - provide POE info;
*) improved cpu usage reporting on CCR boards;
*) improved interface reading performance;
*) changed CLI interface order - first are ethernets, second wireless, third everything else.
Within group interfaces are ordered by name;
*) interfaces are deleted much faster, could be bottleneck on systems with many ppp sessions;
*) pptp,l2tp,6to4 tunnel encapsulation/decapsulation now resets packet marks to
have consistent behavior across tunnels;
*) fix simple queue interface matching when doing encapsulation in some tunnel,
could result in double accounted packets;
*) ip/ipv6 firewall has all-ether,all-wireless,all-vlan,all-ppp interface matchers
*) queue limits could be inaccurate for large limits (100M or more);
*) added initial OpenFlow support
Re: v6 rc8 released
and I have an idea and proposal development, by means of the rc9 version will not be able to develop a graphical interface to the DDoS attack against protection?
Re: v6 rc8 released
Not able to update via "System/Packages" yet.. still thinks 6.0rc7 is current.
Re: v6 rc8 released
"Interface window" in winbox stops sending data. When making
a new connection the windows is empty.
Also no SNMP - CPU, DISK
RB433AH ROS6.0RC8 4feb13
This was not the case with the friday 1feb13 release where SNMP shot to 100%
Jörgen
a new connection the windows is empty.
Also no SNMP - CPU, DISK
RB433AH ROS6.0RC8 4feb13
This was not the case with the friday 1feb13 release where SNMP shot to 100%
Jörgen
Re: v6 rc8 released
still getting
System rebooted because of ping watchdog timeout
all rbs with ros6.0rc8
happens every couple of hours
System rebooted because of ping watchdog timeout
all rbs with ros6.0rc8
happens every couple of hours
Re: v6 rc8 released
watchdog disabled(off) and what is new ?still getting
System rebooted because of ping watchdog timeout
all rbs with ros6.0rc8
happens every couple of hours
Re: v6 rc8 released
Dear Normis!
Multicast routing (PIM-SM) same source (IPTV channel) with different client IP (Set Top Box) not working in CCR1036 (RC6,RC7,RC8). Same ROS version (RC6,RC7,RC8) and same configuration (1. RP, 3. Interface) working correctly in RB2011.
Please investigate this problem...
Thx.
Attila
Multicast routing (PIM-SM) same source (IPTV channel) with different client IP (Set Top Box) not working in CCR1036 (RC6,RC7,RC8). Same ROS version (RC6,RC7,RC8) and same configuration (1. RP, 3. Interface) working correctly in RB2011.
Please investigate this problem...
Thx.
Attila
-
-
FutileNetworks
newbie
- Posts: 36
- Joined:
Re: v6 rc8 released
20:39:03 route,bgp,error tcp-md5-key currently cannot be enabled on CCR devices
Why wasn't this mentioned in the Changelog? When will it be fixed and when it is please include it in the Changelog!! My router is pretty much useless without this.
edit: found post where it will be fixed in rc9, thanks.
Why wasn't this mentioned in the Changelog? When will it be fixed and when it is please include it in the Changelog!! My router is pretty much useless without this.
edit: found post where it will be fixed in rc9, thanks.
Last edited by FutileNetworks on Tue Feb 05, 2013 5:39 am, edited 1 time in total.
Re: v6 rc8 released
with watchdog off the rb411 runs out of memory and hangs
and connection tracking off with 1 filter rule connection tracking is still on
and connection tracking off with 1 filter rule connection tracking is still on
Re: v6 rc8 released
post there:with watchdog off the rb411 runs out of memory and hangs
and connection tracking off with 1 filter rule connection tracking is still on
/system resource print
/system routerboard print
Re: v6 rc8 released
I found firewall problem in rc8 - CCR1036
and I get on output:
I had a rule that NAT 10.10.0.0/16 to 185.15.0.5 but it was deleted.
I have to disable all nat rules to switch off nat this packets. After switching on I still have NAt 10.10.0.0/16 to 185.15.0.5
Code: Select all
/ip fire nat pri
Flags: X - disabled, I - invalid, D - dynamic
0 chain=srcnat action=src-nat to-addresses=185.15.0.3 src-address=192.168.24.0/22
1 chain=srcnat action=src-nat to-addresses=185.15.0.4 src-address=192.168.14.0/23
/ip fire fil pri
Flags: X - disabled, I - invalid, D - dynamic
0 chain=output action=log protocol=icmp log-prefix=""
Code: Select all
22:45:22 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.72.22->10.10.72.1, len 56
22:45:23 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.70.8->10.10.70.3, NAT (10.10.70.8->185.15.0.5)->10.10.70.3, len 50
22:45:23 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.72.22->10.10.72.1, len 50
22:45:24 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.70.8->10.10.70.3, NAT (10.10.70.8->185.15.0.5)->10.10.70.3, len 50
22:45:24 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.72.22->10.10.72.1, len 50
22:45:25 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.70.8->10.10.70.3, NAT (10.10.70.8->185.15.0.5)->10.10.70.3, len 50
22:45:25 firewall,info output: in:(none) out:eth5-PLANET-p3, proto ICMP (type 8, code 0), 10.10.72.22->10.10.72.1, len 50
I have to disable all nat rules to switch off nat this packets. After switching on I still have NAt 10.10.0.0/16 to 185.15.0.5
Re: v6 rc8 released
*) ip/ipv6 firewall has all-ether,all-wireless,all-vlan,all-ppp interface matchers
THANK YOU, THANK YOU, THANK YOU Mikrotik
-
-
engineertote
Member Candidate
- Posts: 177
- Joined:
Re: v6 rc8 released
in the download page there was RC08 few minutes back , now its RC07 only ??
Re: v6 rc8 released
RC8 has a critical issue with Certificates. We temporarily pulled it off the website. If you don't use certificates, you can keep using RC8
Re: v6 rc8 released
The "All packages" link for 6.x is missing completly after your pull back operation. I`ve just bricked a testboard with partitions on it and there is no 6.x (all packages) to download and use netinstall... Lucky that that was a test board...
Re: v6 rc8 released
ALL files from RC9 with fixed certificates:The "All packages" link for 6.x is missing completly after your pull back operation. I`ve just bricked a testboard with partitions on it and there is no 6.x (all packages) to download and use netinstall... Lucky that that was a test board...
http://www.mikrotik.com/download/share/ ... 6.0rc9.zip
Re: v6 rc8 released
ema
Please make sure you have not deleted firewall rule by yourself accidentally. We have upgraded many routers to rc8, and NAT rules were untouched on every of them.
For disabled NAT and logging wrong behavior, if you think that v6.0rc8 does not work properly with NAT or not NAT packets, please make support output file and send it to support department (support@mikrotik.com), thank you very much for help.
Please make sure you have not deleted firewall rule by yourself accidentally. We have upgraded many routers to rc8, and NAT rules were untouched on every of them.
For disabled NAT and logging wrong behavior, if you think that v6.0rc8 does not work properly with NAT or not NAT packets, please make support output file and send it to support department (support@mikrotik.com), thank you very much for help.
Re: v6 rc8 released
Where did they move the Beta downloads to?
I am not able to find them... weird.
I am not able to find them... weird.
Re: v6 rc8 released
what beta downloads ?Where did they move the Beta downloads to?
I am not able to find them... weird.
Re: v6 rc8 released
All the RC downloads are gone from the download website.
Re: v6 rc8 released
wait for fix, or use pre-release rc9 http://www.mikrotik.com/download/share/ ... 6.0rc9.zipAll the RC downloads are gone from the download website.
Re: v6 rc8 released
it has RC7. As Honzam also repeated, you can either use RC7, or use the pre release of RC9. Of if you don't use certificates, keep using the RC8All the RC downloads are gone from the download website.
Re: v6 rc8 released
What do you mean by use certificates? The only way I think I use them is connecting securely with winbox and ssh to the Mikrotik. Is that an issue?it has RC7. As Honzam also repeated, you can either use RC7, or use the pre release of RC9. Of if you don't use certificates, keep using the RC8
Re: v6 rc8 released
I hope it's not too much off-topic. Where can I find mipsbe, PPC and TILE 6.0rc8 (all_packages .zip files)? Anyone willing to share their downloads? I don't need it for production, just I didn't download it in time, and now that's pulled, it would leave an empty hole in my ROS collection!
Re: v6 rc8 released
Ok they were gone .. RC that is so it must have got fixed since I posted. Looks fine now.
Re: v6 rc8 released
http://www.mikrotik.com/download/share/ ... 6.0rc8.zipI hope it's not too much off-topic. Where can I find mipsbe, PPC and TILE 6.0rc8 (all_packages .zip files)? Anyone willing to share their downloads? I don't need it for production, just I didn't download it in time, and now that's pulled, it would leave an empty hole in my ROS collection!
-
-
onnoossendrijver
Member
- Posts: 488
- Joined:
- Location: The Netherlands
Re: v6 rc8 released
Thanks! This is a GREAT improvement! On some devices: before: <1 mbit/s, now: 160 mbit/s.*) wireless - fixed AES encryption speed issues (upgrade suggested);