2.9.23 released

Thu Apr 27, 2006 2:16 pm

What's new in 2.9.23:

*) fixed bug - Intel Gigabit ethernet cards did not report current traffic rate
correctly;
*) improved rb500 ether1 interface stability
*) fixed graphing bug - statistics' values of cpu graphs

oriondotnet · Thu Apr 27, 2006 4:00 pm

Hope this version fix the Intel gigabit problem stuck....

gerencia@e-digitales.com · Thu Apr 27, 2006 5:03 pm

I still have problems with ECMP, and masquerading, packets are lost , and i have read inforum that many people have the same problem,,please when will be fixed it ?

Thu Apr 27, 2006 6:57 pm

I still have problems with ECMP, and masquerading, packets are lost , and i have read inforum that many people have the same problem,,please when will be fixed it ?

Create a another topic and paste in your ECMP and NAT configuration

cdemers · Thu Apr 27, 2006 11:52 pm

Hi Everyone,

Been noticing that the Queue tree window in winbox is not always working. On one router it will work fine, and on another it will not. First noticed this in i think it was 2.9.20, just thought it was a fluke of some kind, but it worked just fine in previous revisions. It seems to be working, but i never see the window get updated very often. I am using the exact example for equally sharing a connection in the manual. Anyone else seeing this behaviour?

Chris

sten · Fri Apr 28, 2006 1:25 am

Hope this version fix the Intel gigabit problem stuck....

Is this a recent problem? I haven't had this problem in v2.9.18-v2.9.20. v2.9.21 was a nasty surprise in performance.
What chipset and what versions do you have? I'd love to hear about the problem.

hecklertm · Tue May 02, 2006 5:56 am

Has anyone else had a problem whereby any hotspot users (new or old users) are blocked on all ports accept port 80 after the rotuer has been running for 6-12 hours? It works fine again if you reboot. I do not have this problem with my 2.9.18 routers, only with a rb using 2.9.23. Anyone else?

rpingar · Tue May 02, 2006 9:45 am

I have problem too with a verison of Intel Gigabit DUAL.
With the single nic everything seems working.

But with dual if I plug two gbit lans the interface goes down, each led shout down and on interface statistic i see 4Gb traffic in each direction.
If one is gbit lan and the second is manually setted up at 100mbps the the board works fine.

I sent supout before and after the problem occurs but no reply yet.

I have several nics of the same series and all have the problem
The P/N is PWLA8492MT

Regards

2.9.23 released

2.9.23 released

Queue Tree window in winbox

Who is online