Community discussions

MikroTik App
  4. RouterOS
  5. Beginner Basics

VLAN question

Locked
 
yuridee
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 99
Joined: Wed Jun 27, 2012 5:32 am

VLAN question

Thu Apr 04, 2013 3:37 pm

Hi there, I'm wandering, how can I add "vlan-manag vlan-id=1" and "vlan-corp vlan-id=2" to the eth4-trunk interface? See the code below:
Thank you,
Y
Code: Select all
/interface vlan
add interface=eth3-trunk l2mtu=1594 name=vlan1 vlan-id=110
add interface=eth3-trunk l2mtu=1594 name=vlan2 vlan-id=120
add interface=eth3-trunk l2mtu=1594 name=vlan3 vlan-id=130
add interface=eth3-trunk l2mtu=1594 name=vlan-manag vlan-id=1
add interface=eth3-trunk l2mtu=1594 name=vlan-corp vlan-id=2
Code: Select all
add interface=eth4-trunk l2mtu=1594 name=vlan4 vlan-id=140
add interface=eth4-trunk l2mtu=1594 name=vlan5 vlan-id=150
add interface=eth4-trunk l2mtu=1594 name=vlan6 vlan-id=160
Top
 
CelticComms
Forum Guru
Forum Guru
Posts: 1765
Joined: Wed May 02, 2012 5:48 am

Re: VLAN question

Fri Apr 05, 2013 3:21 pm

You can add VLAN interfaces with the same VLAN ID to multiple interfaces but you have to give the interfaces different names. Typically make the VLAN interfaces names like VLAN10-Eth2 or VLAN10-02 etc. .
Top
 
yuridee
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 99
Joined: Wed Jun 27, 2012 5:32 am

Re: VLAN question

Fri Apr 05, 2013 8:13 pm

Thank you, that make sense, I failed to see...
:)
Top
Locked

Who is online

Users browsing this forum: anav, AndyGs, Bing [Bot], Majestic-12 [Bot] and 24 guests
  4. RouterOS
  5. Beginner Basics