hello everyone.
i'm not that good with mikrotik so i have a simple question for someone, and a not simple question for someone like me
if anyone can find the time to respond, here is my question

i have 4 internet connections from 2 diferent ISP
2 x 1 cable modem connection 4 Mbps/1Mbps
2 x 1 adsl connection "ppoe" 8 Mbps/768 kbps

i have "RB750G" 5 port.

WAN1- 192.168.1.2 > 4 Mbps/1Mbps "already conected "
WAN2 - 192.168.2.2 > 4 Mbps/1Mbps "already conected"
WAN3 - 192.168.3.2 > 8 Mbps/768 kbps " PPPoE Client" bridge mode
WAN4 - 192.168.4.2 > 8 Mbps/768 kbps " PPPoE Client" bridge mode
LOCAL - 192.168.0.1 LAN


conected clients will be from 30 to max 40 , loadbalancing + failover

can you tell me if this is possible , and if yes. always if you find the time to tell me how.

Thanks.

Use this scipt:
http://aacable.wordpress.com/2011/06/04 ... -by-zaib/#

Change the IP@ to your plan and it should work fine.
Regards

PCC is not very good with un equal links.

1st of all you will not have a 100% load balancing with different ratio of links ...

try to send traffic twice to WAN3 & WAN4
where:
WAN1 per-connection-classifier=both-addresses-and-ports:6/0
WAN2 per-connection-classifier=both-addresses-and-ports:6/1
WAN3 per-connection-classifier=both-addresses-and-ports:6/2
WAN4 per-connection-classifier=both-addresses-and-ports:6/3
WAN3 per-connection-classifier=both-addresses-and-ports:6/4
WAN4 per-connection-classifier=both-addresses-and-ports:6/5

but as you say your up are different in the 2 links and it is lower in WAN3 & WAN4 ...
so if you have a high traffic in up way then i think you will see a bottleneck in the up stream in WAN3 & WAN4 ...

send traffic twice to WAN3 & WAN4 , will try this

i m trying load balancing with 2 wan but the issue is my routa wan 2 in not working distance 2 color in blue tell me what can i do please

distance 2 color in blue

this is normal the priority is for distance 1 if it is down then distance 2 will work..

i m trying load balancing with 2 wan but the issue is my routa wan 2 in not working

can you see any traffic in interface ?

everything works great got all 4 wan's from same isp,,,
anyone knows whats the best router board that can do load balancing at best ?

Hello,

it's depend on how many connections, filters, queue, routeur have to manage ...

regards

hey
i m using 8 link of dsl 12mb dload & 1mb upload each
what model of mikrotik is best for me
plz repply

for load balancing, ECMP is perfect

http://wiki.mikrotik.com/wiki/ECMP_load ... masquerade

this link can help you to solve your problem

http://wiki.mikrotik.com/wiki/Per-Traff ... _Balancing