Hello,
my network topology looks like this: ISP-RouterA-routerB-Sector Antennas. On both routers I use NAT. The ISP has given me 1 global IP address. But as the number of my custommers on sectors have grown, I asked the ISP to give me more IP adddresses and they agreed.
I plan to remove NAT on router B to allow each sector custommers use one global IP. But I am not sure how to do this. Can you please suggest me something?
Re: Change NAT
You have 3 methods to choose from... I suggest you use which ever you are most comfortable with.
1. PPPoE
http://wiki.mikrotik.com/wiki/PPPOE_Server
2. DHCP
This is what you do now except with public addresses NO NAT, NO Masquerade.
3. 1 to 1 NAT
http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT (1 to 1 Nat at the bottom of the page)
If you would like to choose a method then ask for an explanation it would be easier than explaining them all.
1. PPPoE
http://wiki.mikrotik.com/wiki/PPPOE_Server
2. DHCP
This is what you do now except with public addresses NO NAT, NO Masquerade.
3. 1 to 1 NAT
http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT (1 to 1 Nat at the bottom of the page)
If you would like to choose a method then ask for an explanation it would be easier than explaining them all.
Re: Change NAT
Thanks,
I think I will use 1 to 1 NAT as I am more familiar with it.
I think I will use 1 to 1 NAT as I am more familiar with it.