Hello ,

i just want to make a simple rule on my router rb450. i have two ISP on my router and i made load balancing. now i want to define some user will use specific connection like below.

ISPS are : A and B

192.168.2.2-192.168.2.20 will use ISP A

192.168.2.21-192.168.2.40 will use ISP B

please help me with this.

You need to identify the traffic with the ip firewall mangle feature and add a routing mark to the traffic. Then you need that connectons route to have the matching routing mark.

You need to identify the traffic with the ip firewall mangle feature and add a routing mark to the traffic. Then you need that connectons route to have the matching routing mark.

Can you please give me example with code please ?

You need to identify the traffic with the ip firewall mangle feature and add a routing mark to the traffic. Then you need that connectons route to have the matching routing mark.

hello again, i tried myself many times. but i am not successes . please help me to configure with this. i want to keep my load balancing and fail over for all user. only specific user will go through my mentioned isp.

You'll have to adjust the IP route statements to match the correct gateways.

thanks a lot brother. it helped me a lot.

can you please help me with this ?

http://forum.mikrotik.com/viewtopic.php?f=2&t=75086

can you please help me with this ?

http://forum.mikrotik.com/viewtopic.php?f=2&t=75086

Sorry, the hotspot feature is my biggest MikroTik weakness and cannot tell from what you posted what the solution would be.

thanks. already you helped me lot. i have increased your karma i am waiting if anyone can give me solve.