Hi,

we are using RB450G as our gateway router where multiple pc are connected via static route and natted private IP, we need to takE a log of visited url of each client including their sorce IP, when using webproxy with remote log we are able to get visited url however the IP always shows as router IP

is there a way out where we can log visited url with source IP address

This is required for us to monitor which user visited which sites during different time of the day

Regards

Vishal

Vishal, perhaps there is one more another proxy before your proxy or masquerade is happening on some point.

My proxy is showing IP addresses of the customers,

12:23:47 web-proxy,account 192.168.7.166 GET http://www.test.com/images/design/new-right-bottom.png action=allow cache=HIT (after validation)
12:23:47 web-proxy,account 192.168.7.166 GET http://www.test.com/images/design/new-left-bottom.png action=allow cache=HIT (after validation)
12:23:47 web-proxy,account 192.168.7.166 GET http://www.test.com/images/design/more.png action=allow cache=HIT (after validation)

are you masking the request for proxy?

M:

Sergejs,

Indeed this is working, iam now able to log host ip with their url visited, there was some issue in dsnat redirect to port 8080, however i have two major problems

First

In the log i also see IP that do not belong to my network (unber web-proxy account) - ive attached a file with unknown IP in blocks for reference
-is the web-proxy account and web-proxy debug x-forwerded-for both the same in terms that they log the host or source ip address

second

by using web proxy i forced to use dnat to redirect port from 80 to 8080 and added to this this may take considerable cpe usage in routerboard, is there any other way i can log ip and thier url visited withoput using web proxy

Hi my name id Jaffar and i am highly thankfull to u people for ur post

I need a help today

i am using routeros and i am not able to get users logging visited url with source IP address

i have also set up web proxy
can any one Plz Help

Not sure if you guys got the help you needed, but it looks like your proxy has been opened to the world, you need a rule like: Where ether1 is your internet port.

This will ensure that only those LOCAL to the network can access the web-proxy service. (If you put it sufficiently high in the input chain that is..

use tcp rule for log but ı can not tried it with proxy.

chain=forward action=log connection-state=new protocol=tcp log-prefix=""

......

Sergejs,

Indeed this is working, iam now able to log host ip with their url visited, there was some issue in dsnat redirect to port 8080, however i have two major problems

First

In the log i also see IP that do not belong to my network (unber web-proxy account) - ive attached a file with unknown IP in blocks for reference
-is the web-proxy account and web-proxy debug x-forwerded-for both the same in terms that they log the host or source ip address

second

by using web proxy i forced to use dnat to redirect port from 80 to 8080 and added to this this may take considerable cpe usage in routerboard, is there any other way i can log ip and thier url visited withoput using web proxy

hello can you tell me how you configured to get this type of logs??