Hello,
I am using pcc loadbalancing on my router RB450, i have two connection from two ISP, also using hotspot. everything going fine.

problem is if i make binding an ip and make it bypass from hotspot, that ip donot get loadbalancing. if that IP download or upload , get only from one ISP connection. if i release him from bypass and move into regular,it get good balancing from two isp.

please give me a solve how can i fix that if i make that IP into bypass, it will also get load balancing.

I was waiting for this post... anyone please help me...

Hello,
I am using pcc loadbalancing on my router RB450, i have two connection from two ISP, also using hotspot. everything going fine.

problem is if i make binding an ip and make it bypass from hotspot, that ip donot get loadbalancing. if that IP download or upload , get only from one ISP connection. if i release him from bypass and move into regular,it get good balancing from two isp.

please give me a solve how can i fix that if i make that IP into bypass, it will also get load balancing.

I was waiting for this post... anyone please help me...

does there anybody can help me with this please ?????? i am waiting till long day...

best

What you have in mangle load balancr rule?

Send from my mobile phone using Tapatalk.

What you have in mangle load balancr rule?

Send from my mobile phone using Tapatalk.

i hope its PPC connection

here is print

[riajul@Vision] /ip firewall mangle> print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=input action=mark-connection new-connection-mark=ether5-AFTAB_conn
passthrough=yes hotspot=auth in-interface=ether5-AFTAB

1 chain=input action=mark-connection new-connection-mark=ether4_BDCOM_conn
passthrough=yes hotspot=auth in-interface=ether4_BDCOM

2 chain=output action=mark-routing new-routing-mark=to_ether5-AFTAB
passthrough=yes hotspot=auth connection-mark=ether5-AFTAB_conn

3 chain=output action=mark-routing new-routing-mark=to_ether4_BDCOM
passthrough=yes hotspot=auth connection-mark=ether4_BDCOM_conn

4 chain=prerouting action=accept dst-address=58.147.172.152/29
in-interface=ether1-LAN

5 chain=prerouting action=accept dst-address=114.31.3.128/29
in-interface=ether1-LAN

6 chain=prerouting action=mark-connection
new-connection-mark=ether5-AFTAB_conn passthrough=yes
dst-address-type=!local hotspot=auth in-interface=ether1-LAN
per-connection-classifier=both-addresses-and-ports:2/0

7 chain=prerouting action=mark-connection
new-connection-mark=ether4_BDCOM_conn passthrough=yes
dst-address-type=!local hotspot=auth in-interface=ether1-LAN
per-connection-classifier=both-addresses-and-ports:2/1

8 chain=prerouting action=mark-routing new-routing-mark=to_ether5-AFTAB
passthrough=yes hotspot=auth in-interface=ether1-LAN
connection-mark=ether5-AFTAB_conn

9 chain=prerouting action=mark-routing new-routing-mark=to_ether4_BDCOM
passthrough=yes hotspot=auth in-interface=ether1-LAN
connection-mark=ether4_BDCOM_conn

bypassed user not use hotspot=auth

bypassed user not use hotspot=auth

My concern not use hotspot for bypass. Concern is if i use bypass ,its not using loadbalancing. I mean i have two connection. When i use hotspot login, then when i download,it normally download from two connection using load balancing.but if i bypass, its downloading from one connection.