Hello,

I have an RB2011UAS-2HnD-IN route and almost complete configured, but i want to do this config but i am unable to do:

1) SSID = WLAN1
WPA with preshared-key = WLAN1-PSK
network 192.168.1.0/24 (wired LAN on bridge LAN)

2) SSID = WLAN2
WPA with preshared-key = WLAN2-PSK
network 192.168.2.0/24

WLAN1 can see LAN and go to Internet (maybe also see WLAN2)
WLAN2 can NOT see WLAN1 nor LAN but can go to internet (i would like to apply a QoS max 4Mbps Down 1Mbps Up)

LAN and WLAN1 work OK, but i can config WLAN2 in other network (guest network).

Can any give an example of config ?

Thank you.