Community discussions

MikroTik App
 
chrisintaipei
newbie
Topic Author
Posts: 31
Joined: Fri Sep 21, 2012 1:04 pm

CPU 100% - roughly console 40% + management 60%

Mon Nov 11, 2013 5:54 am

i got a RB751G-2HnD here.

not sure what's wrong with it, CPU is 100% flat all the time, and in profile, the CPU is eaten by, roughly, console 40% and management 60%.

really strange. any idea?

Image
 
maximt
Frequent Visitor
Frequent Visitor
Posts: 71
Joined: Tue Jul 20, 2010 6:29 am

Re: CPU 100% - roughly console 40% + management 60%

Mon Nov 11, 2013 6:09 am

i have similar proplem with wifi AP Metal 2SHPn (but on ROS 6.5)
support says there is console crashing bug
 
chrisintaipei
newbie
Topic Author
Posts: 31
Joined: Fri Sep 21, 2012 1:04 pm

Re: CPU 100% - roughly console 40% + management 60%

Mon Nov 11, 2013 6:28 am

is this something that i should worry about? and is there a fix for it?

i am not sure if this is related but the box was reset with new completely configuration in less than 12 hours ago. and i noticed the very next morning that i suddenly cannot access it via winbox. strangly web access works. when i used web access to reboot, it reboots and hangs. i had to physically unplug the power to get it back again.

if 100% CPU is relating to this, then i am worried... before the configure reset, i don't remember seeing this problem.

else, routing and openvpn works fine for me so far.

considering to export the settings and reset it again...
 
JanezFord
Member Candidate
Member Candidate
Posts: 270
Joined: Wed May 23, 2012 10:58 am

Re: CPU 100% - roughly console 40% + management 60%

Mon Nov 11, 2013 12:34 pm

Try disabling snmp if you don't need it ... I've seen high management usage in many cases caused by enabled snmp.

JF
 
chrisintaipei
newbie
Topic Author
Posts: 31
Joined: Fri Sep 21, 2012 1:04 pm

Re: CPU 100% - roughly console 40% + management 60%

Mon Nov 11, 2013 1:11 pm

Try disabling snmp if you don't need it ... I've seen high management usage in many cases caused by enabled snmp.

JF
is this in ip/snmp? if yes, it's not enabled.

i am a bit worried because i'd be away for a week or two. fingers crossed that nothing happens while i am away.