I just purchased a RB532A with a RB 564 Daughterboard.
I installed 2.9.25 an when i issue the following command in terminal window:
/interface ethernet print
i get:
Flags: X - disabled, R - running
# NAME MTU MAC-ADDRESS ARP
0 R ether1 1500 00:0C:42:04:AF:59 enabled
1 R ether2 1500 00:0C:42:04:AF:5A enabled
2 R ether3 1500 00:0C:42:04:AF:5B enabled
Where is the other 6 ports?
When i plug a UTP cable in to the upper 6 slots the corresponding led is blinking...
Also I tried to unplug the daughterboard and plug it again.. it seems firmly plugged.
From the BOOTRom menu i get
Board Info:
Board type: 532A
Serial number: 0B8301D9F7EE
Firmware version: 1.13
CPU frequency: 264 MHz
Memory size: 64 MB
Korina MAC address: 00:0C:42:04:AF:59
VIA1 MAC address: 00:0C:42:04:AF:5A
VIA2 MAC address: 00:0C:42:04:AF:5B
VIA3 MAC address: 00:0C:42:03:64:39
VIA4 MAC address: 00:0C:42:03:64:3A
VIA5 MAC address: 00:0C:42:03:64:3B
VIA6 MAC address: 00:0C:42:03:64:3C
VIA7 MAC address: 00:0C:42:03:64:3D
VIA8 MAC address: 00:0C:42:03:64:3E
But i only see 3 ethernets in mikrotik RouterOS.
I also tried with 48v / 0,4A power supply as i am currently using an 18v / 0,8A.
Where is the problem?
/system resource pci print
# DEVICE VENDOR NAME IRQ
0 00:06.0 unknown unknown (rev: 1) 0
1 00:03.0 VIA Technologies, Inc. VT6105 [Rhine-III] (rev:... 143
2 00:02.0 VIA Technologies, Inc. VT6105 [Rhine-III] (rev:... 142
3 00:00.0 Integrated Device Technol... IDT79RC32434 (rev: 0) 140
Thank you for your interest!
# DEVICE VENDOR NAME IRQ
0 00:06.0 unknown unknown (rev: 1) 0
1 00:03.0 VIA Technologies, Inc. VT6105 [Rhine-III] (rev:... 143
2 00:02.0 VIA Technologies, Inc. VT6105 [Rhine-III] (rev:... 142
3 00:00.0 Integrated Device Technol... IDT79RC32434 (rev: 0) 140
Thank you for your interest!
/system resource pci print detail
0 device="00:06.0" name="unknown (rev: 1)" vendor="unknown"
category="PCI bridge" vendor-id="0x3388" device-id="0x0031" irq=0
1 device="00:03.0" name="VT6105 [Rhine-III] (rev: 134)"
vendor="VIA Technologies, Inc." category="Ethernet controller"
vendor-id="0x1106" device-id="0x3106" irq=143 memory=0x50000100-0x500001FF
io=0x18800100-0x188001FF
2 device="00:02.0" name="VT6105 [Rhine-III] (rev: 134)"
vendor="VIA Technologies, Inc." category="Ethernet controller"
vendor-id="0x1106" device-id="0x3106" irq=142 memory=0x50000000-0x500000FF
io=0x18800000-0x188000FF
3 device="00:00.0" name="IDT79RC32434 (rev: 0)"
vendor="Integrated Device Technology, Inc."
category="Non-VGA unclassified device" vendor-id="0x111d"
device-id="0x0000" irq=140 io=0x18800000-0x188000FF
0 device="00:06.0" name="unknown (rev: 1)" vendor="unknown"
category="PCI bridge" vendor-id="0x3388" device-id="0x0031" irq=0
1 device="00:03.0" name="VT6105 [Rhine-III] (rev: 134)"
vendor="VIA Technologies, Inc." category="Ethernet controller"
vendor-id="0x1106" device-id="0x3106" irq=143 memory=0x50000100-0x500001FF
io=0x18800100-0x188001FF
2 device="00:02.0" name="VT6105 [Rhine-III] (rev: 134)"
vendor="VIA Technologies, Inc." category="Ethernet controller"
vendor-id="0x1106" device-id="0x3106" irq=142 memory=0x50000000-0x500000FF
io=0x18800000-0x188000FF
3 device="00:00.0" name="IDT79RC32434 (rev: 0)"
vendor="Integrated Device Technology, Inc."
category="Non-VGA unclassified device" vendor-id="0x111d"
device-id="0x0000" irq=140 io=0x18800000-0x188000FF
Re: RouterBoard 564 problem
Hello,
I recently bought used RB532r5 and got the same issue as in this post. I will give more details as soon as I got home, but I want to know is it possible to fix it now since RB532 is EOL.
Best Regards
diax78
I recently bought used RB532r5 and got the same issue as in this post. I will give more details as soon as I got home, but I want to know is it possible to fix it now since RB532 is EOL.
Best Regards
diax78