I have to setup Point to Multipoint Setup for Video Surveillance Streaming.

Its connecting 3 points together. All 3 points have Security
surveillance System (DVR) and I wanna link all 3 places together. Once link is estabilished It will be a easy job.

My question : What kind of Hardware should I deploy at this point to get LAG free video streaming ? The setup should have low latency too. I can link Point A and C without any hassle. One thing that I should mention, there is a tall building just infront of point B thats a 80 feet Building (Please See picture in attachment), I'm pretty confused about reliability of that link. Please help as I'm newbie to wireless backhauls and links.

Some Info:
Point A height from ground : 85 ft.
Point B height from ground : 30 ft.
Point C height from ground : 50 ft.

Picture :



Estimated Bandwidth required : < 20 Mbps

Please Help

I would do 2 ptp links with SXT. You can do Omnitik with sxt but ptmp gives additional latency.
SXT is cheap.

I would do 2 ptp links with SXT. You can do Omnitik with sxt but ptmp gives additional latency.
SXT is cheap.

But the problem is that there is no LOS at Point B.
I am confused about the reliability of link would it be enough to give a throughput of ~20 MBPS ?
What do you think ?

Did not see the nlos. Without los it will not work.

Gesendet von meinem GT-N7000 mit Tapatalk

No los no point in going any further. You need to get on that white apartment block with a repeater or dog leg around the obstruction. My approach here would be to site the omnitik on the white building and sxt at each point

No los no point in going any further. You need to get on that white apartment block with a repeater or dog leg around the obstruction. My approach here would be to site the omnitik on the white building and sxt at each point

Ok I will try mounting an Omnitik at point A first and see what signal levels it is giving at C.

If something goes wrong, I would try to put it at the top of white building.

Omnitik at Point A and SXT Lite at B and C

Thanks